Merit Brass Stainless Steel 316 Ball Valve, Unibody, Lever, 3/8″ NPT Female

A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline resulting in lower friction and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Female national pipe Taper NPT threads for use with male threaded pipes. Unibody construction for reduced possibility of valve leakage. Made of stainless steel 316 for strength and resistance to corrosion. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve.

Lever handle with vinyl sleeve for manual on/off control. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Ball valves can be referred to as full port or reduced port also known as regular or standard port depending on the inner diameter of the valve.

They are primarily used in air, gas, liquid, and steam applications. This ball valve is standard or reduced or regular port for reduced valve size and cost and is for use with water lines, processing plants, and agricultural applications. The company, oh, family-owned since 1937 and headquartered in Cleveland, distributes pipe fittings in the United States and Canada.

---

Merit Brass Stainless Steel 316 Ball Valve, Unibody, Lever, 1/4" NPT Female

The unibody construction and polytetrafluoroethylene PTFE reinforced seats and seals reduce the risk of valve leakage. Pounds per square inch gauge psig rating of 800 for water, oil, and gas WOG applications. The merit brass one-piece unibody ball valve is made of stainless steel 316 and has a lever handle and female National Pipe Taper NPT threaded connections on both ends.

This stainless steel 316 valve, which is higher strength and more corrosion resistant than stainless steel 304, has a lever handle with a vinyl sleeve for manual on/off control. This ball valve is standard or reduced or regular port for reduced valve size and cost and is for use with water lines, processing plants, and agricultural applications.

They are primarily used in air, liquid, gas, and steam applications. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The maximum pressure is 800 pounds per square inch gauge psig for use with water, oil, and gas WOG and the working temperature range is 0 - 400 degrees Fahrenheit.

A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline resulting in lower friction and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Lever handle with vinyl sleeve for manual on/off control.


Similar products

---

Dixon RN33 Stainless Steel 316 Hose Fitting, Insert, 3/8" NPT Male x 3/8" Hose ID Barbed

Connects to a hose on one end and an NPT female connector on the other. Unibody construction for reduced possibility of valve leakage. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Made of stainless steel 316 for strength and resistance to corrosion.

They are made of brass, stainless steel, pressure, galvanized steel, and other materials that resist corrosion, and wear. Hose fittings have various types of connections, push-to-connect, barbed, dry disconnect, including threaded, and others including those based on internationally-accepted specifications.

Barbed fitting for a tight seal on hoses. Adapter for connecting pipes or hoses of different types. This dixon hose fitting is made of type 316 stainless steel and connects hose to female threaded pipe conforming to the NPT standard. This adapter is for connecting a hose to a female National Pipe Taper NPT threaded connector.

The company, is headquartered in Chestertown, founded in 1916, MD. This fitting is made of type 316 stainless steel for higher strength and greater corrosion resistance than Type 304 stainless steel. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems.

A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included, and male NPT threads on the other end to connect to female NPT threaded connections.


Similar products

---

Dixon RN43 Stainless Steel 316 Hose Fitting, Insert, 3/8" NPT Male x 1/2" Hose ID Barbed

A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included, and male NPT threads on the other end to connect to female NPT threaded connections. Pounds per square inch gauge psig rating of 800 for water, oil, and gas WOG applications.

This fitting is made of type 316 stainless steel for higher strength and greater corrosion resistance than Type 304 stainless steel. Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, and other materials that resist corrosion, galvanized steel, pressure, and wear.

Barbed fitting for a tight seal on hoses. Made of stainless steel 316 for strength and resistance to corrosion. Unibody construction for reduced possibility of valve leakage. Lever handle with vinyl sleeve for manual on/off control. The company, founded in 1916, is headquartered in Chestertown, MD. Connects to a hose on one end and an NPT female connector on the other.

Female national pipe Taper NPT threads for use with male threaded pipes.


Similar products

---

304/304L Forged Stainless Steel Pipe Fitting, 90 Degree Elbow, Class 3000, 3/8" NPT Male X 3/8" NPT Female

Barbed fitting for a tight seal on hoses. Made from stainless steel 304/304L for corrosion resistance. Pounds per square inch gauge psig rating of 800 for water, oil, and gas WOG applications. When purchasing pipe fittings, shape, consider the application, as this will affect material type, size and required durability.

Unibody construction for reduced possibility of valve leakage. Barbed fitting for a tight seal on hoses. Connects to a hose on one end and an NPT female connector on the other. Female national pipe Taper NPT threads for use with male threaded pipes. Class is a standard relating to tolerance, and wall thickness, construction, dimension, but it is not a direct measurement of maximum working pressure.

This 90-degree street elbow is a class 3000 forged stainless steel 304/304L pipe fitting with male National Pipe Taper NPT threads on one end and female NPT threads on the other for connecting pipes and fittings. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.

90-degree street elbow for changing flow direction. Made of stainless steel 316 for strength and resistance to corrosion. Forged steel for strength. Adapter for connecting pipes or hoses of different types.


Similar products

---

Brennan 5404-06-04-SS Stainless Steel Pipe Fitting, Hex Nipple, 3/8" X 1/4" NPT Male

Male national pipe taper NPT threads on both ends for connecting female threaded pipes and fittings. Class 3000 for high pressure applications. Adapter for connecting pipes or hoses of different types. Connects to a hose on one end and an NPT female connector on the other. Forged steel for strength. This brennan hex nipple is a stainless steel 316 pipe fitting with male National Pipe Taper NPT threads on both ends for joining two pipes or extending pipe length.

The hexagonal shape allows for increased leverage during installation and disassembly with a wrench. Female national pipe Taper NPT threads for use with male threaded pipes. Brennan Industries manufactures critical flow components. Barbed fitting for a tight seal on hoses. It has npt threads for creating tighter seals than straight threads and is made from stainless steel 316, which is more corrosion resistant than stainless steel 304.

Meets sae j514 specifications for quality assurance. Female national pipe taper npt threads on one end and male NPT threads on the other for connecting two types of pipe. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Made from stainless steel 304/304L for corrosion resistance.




Similar products

---

Stainless Steel 316/316L Pipe Fitting, Nipple, Schedule 80, Seamless Extra Heavy, 3/8" X 1-1/2" NPT Male

Male national pipe Taper NPT threads for connecting female threaded pipes. Female national pipe Taper NPT threads for use with male threaded pipes. Made of stainless steel 316 for strength and resistance to corrosion. Seamless pipe is produced from a solid piece of metal that is heated and moved over a form until the steel is shaped into a hollow tube.

Adapter for connecting pipes or hoses of different types. Connects to a hose on one end and an NPT female connector on the other. 90-degree street elbow for changing flow direction. Nipple for connecting and extending pipes. Meets sae j514 specifications for quality assurance. Connects to a hose on one end and an NPT female connector on the other.

Made from stainless steel 304/304L for corrosion resistance. Lever handle with vinyl sleeve for manual on/off control. Forged steel for strength. Class 3000 for high pressure applications. Unibody construction for reduced possibility of valve leakage. Npt threads for creating tighter seals than straight threads.

Barbed fitting for a tight seal on hoses.


Similar products

---

1/2" NPT, SS 304 Stainless Steel Ball Valve - Full Port, 1000 WOG for Water, Oil, and Gas with Blue Locking Handles, 0.5"

Meets sae j514 specifications for quality assurance. Made from stainless steel 304/304L for corrosion resistance. Adapter for connecting pipes or hoses of different types. Nipple for connecting and extending pipes. 100% individually tested Blowout-proof stem. Stainless steel 304 ball valve female x Male NPT Made of stainless steel 316 for strength and resistance to corrosion.

Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Barbed fitting for a tight seal on hoses. Low carbon content to ensure greater resistance to corrosion. Made from stainless steel 316 for greater corrosion resistance than stainless steel 304. Male national pipe taper NPT threads on both ends for connecting female threaded pipes and fittings.

90-degree street elbow for changing flow direction. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Female national pipe Taper NPT threads for use with male threaded pipes. Female national pipe taper npt threads on one end and male NPT threads on the other for connecting two types of pipe.

Made of stainless steel 316/316L for greater strength than steel 304. Forged steel for strength.


Similar products

---

Dixon 13MHHM300 Stainless Steel 304 Single Pin Heavy Duty Clamp with Cross Hole Wing Nut, 3" Tube OD

Pounds per square inch gauge psig rating of 800 for water, oil, and gas WOG applications. Pack of 1. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Barbed fitting for a tight seal on hoses. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.

175 psi at 250 degree f and 350 psi at 70 degree F wing nut tightened to 25" lbs torque. Made from stainless steel 316 for greater corrosion resistance than stainless steel 304. Adapter for connecting pipes or hoses of different types. Npt threads for creating tighter seals than straight threads. Class 3000 for high pressure applications.

. Made of stainless steel 304. Temperature range : -60 to 450 degree Fahrenheit Low operation torque. 3" tube OD. Barbed fitting for a tight seal on hoses. Female*male npt threaded ends to ANSI B1. 20


Similar products

---

Merit Brass Stainless Steel 316 Ball Valve, Two Piece, Full Port, Lever, 3/4" NPT Female

The maximum pressure is 1, 000 pounds per square inch gauge psig for use with water, oil, and gas WOG and the working temperature range is 0 - 400 degrees Fahrenheit. Single pin heavy duty clamp with cross hole wing nut. Nipple for joining two pipes or extending pipe length. Lever handle with vinyl sleeve for manual on/off control.

Polytetrafluoroethylene PTFE reinforced seats and seals reduce the risk of valve leakage. Female*male npt threaded ends to ANSI B1. 201 heavy duty locking handles with blue vinyl insulator. Male national pipe taper NPT threads on both ends for connecting female threaded pipes and fittings. Made of stainless steel 304.

Connects to a hose on one end and an NPT female connector on the other. 175 psi at 250 degree f and 350 psi at 70 degree F wing nut tightened to 25" lbs torque. Low carbon content to ensure greater resistance to corrosion. 100% individually tested Blowout-proof stem. Ball valves can be referred to as full port or reduced port also known as regular or standard port depending on the inner diameter of the valve.

Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve.


Similar products

---

Milwaukee 48-11-1852 M18 REDLITHIUM XC 5.0 Ah Extended Capacity Battery 2 pack

Two-piece investment cast body SS304 Working Pressure 1, 000 psi WOG. Made of stainless steel 316 for strength and resistance to corrosion. The product is Easy to Use and Easy to Handle. Unibody construction for reduced possibility of valve leakage. Pack of 1. M18 red lithium 5. 0ah bat - 2 Pack. Made from stainless steel 304/304L for corrosion resistance.

Pounds per square inch gauge psig rating of 800 for water, oil, and gas WOG applications. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. Male national pipe Taper NPT threads for connecting female threaded pipes. Male national pipe taper NPT threads on both ends for connecting female threaded pipes and fittings.

Made from stainless steel 316 for greater corrosion resistance than stainless steel 304. Connects to a hose on one end and an NPT female connector on the other. Barbed fitting for a tight seal on hoses. Nipple for connecting and extending pipes. Temperature range : -60 to 450 degree Fahrenheit Low operation torque.




Similar products