Sumner Manufacturing 784100 Internal Fit-Up Clamp, 2″ to 4″

#ad
Sumner SUM 784100 #ad - A separate lifting device to support the flange weight is recommended. Contact points stainless steel - a standard feature. Can be used on all standard weld neck flanges and great with slip-on flanges. Quick action operation. Note: the internal Fit-up Clamp is an alignment tool. One piece construction - no loose pieces.

More information about Sumner SUM 784100 #ad

Sumner Manufacturing 784102 Internal Fit-Up Clamp, 4" to 8", Steel/Stainless Steel

#ad
Sumner Manufacturing SUM 784102 #ad - Note: the internal Fit-up Clamp is an alignment tool. A separate lifting device to support the flange weight is recommended. Can be used on all standard weld neck flanges and great with slip-on flanges. Quick action operation. One piece construction - no loose pieces. Contact points stainless steel - a standard feature.

More information about Sumner Manufacturing SUM 784102 #ad


Similar products



Flange Wizard 53076-M Centering Head Tools, 8" - 48" Pipe Capacity, Standard

#ad
Flange Wizard 496-53076-M #ad - Magnetic. Contact points stainless steel - a standard feature. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. Magnetic. Can be used on all standard weld neck flanges and great with slip-on flanges. Quick action operation. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank.

One piece construction - no loose pieces. Use it as a protractor level, or remove and use the hardened center punch for other marking jobs. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a pipe or tank.

More information about Flange Wizard 496-53076-M #ad


Similar products



Sumner ST-882 Hi Fold-A-Jacks with Roller Head

#ad
Sumner ST-882 #ad - Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank. Magnetic. Contact points stainless steel - a standard feature. Quick action operation. Fold-a-jack jack stand has a sturdy 1-Inch square tube base construction. Can be used on all standard weld neck flanges and great with slip-on flanges.

Quick action Lock washer. Folds up for storage ease. 2500-pound capacity. Patented fall guard. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. One piece construction - no loose pieces.

More information about Sumner ST-882 #ad


Similar products



Sumner Manufacturing 784103 Internal Fit-Up Clamp, 8" to 12"

#ad
Sumner SUM 784103 #ad - Quick action operation. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. Contact points stainless steel - a standard feature. Magnetic. Contact points stainless steel - a standard feature. 2500-pound capacity. Note: the internal Fit-up Clamp is an alignment tool. Can be used on all standard weld neck flanges and great with slip-on flanges.

Fold-a-jack jack stand has a sturdy 1-Inch square tube base construction. Patented fall guard. A separate lifting device to support the flange weight is recommended. One piece construction - no loose pieces. Can be used on all standard weld neck flanges and great with slip-on flanges. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank.

Sumner Manufacturing 784103 Internal Fit-Up Clamp, 8" to 12" #ad - One piece construction - no loose pieces. Quick action operation. Folds up for storage ease. Quick action Lock washer.

More information about Sumner SUM 784103 #ad


Similar products



The Pipe Fitters Blue Book

#ad
Graves Publishing Co. #ad - Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. Quick action Lock washer. Can be used on all standard weld neck flanges and great with slip-on flanges. Buyers beware - counterfeit copies of the pipe Fitters Blue Book are being sold on AMAZON. Folds up for storage ease.

Quick action operation. 2500-pound capacity. One piece construction - no loose pieces. Contact points stainless steel - a standard feature. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank. One piece construction - no loose pieces. Fold-a-jack jack stand has a sturdy 1-Inch square tube base construction.

The Pipe Fitters Blue Book #ad - Can be used on all standard weld neck flanges and great with slip-on flanges. Magnetic. Quick action operation. Contact points stainless steel - a standard feature. Patented fall guard. The only authorized sellers of The Pipe Fitters Blue Book by WV Graves are; - Amazon.

More information about Graves Publishing Co. #ad


Similar products



Flange Wizard 89754 Universal Magnetic Tape Holder

#ad
Flange Wizard 496-89754 #ad - Magnetic. It is a great little magnetic pocket level and your third hand when doing those difficult measuring jobs while working alone. Will secure the end of your tape while laying out close tolerance measurements from the end or the center of your material. Folds up for storage ease. A strong 25 pound pull magnet set in epoxy secures the tape holder to your work.

One piece construction - no loose pieces. Can be used on all standard weld neck flanges and great with slip-on flanges. Can be used on all standard weld neck flanges and great with slip-on flanges. One piece construction - no loose pieces. Quick action operation. Quick action operation. A strong 25 pound pull magnet set in epoxy secures the tape holder to your work.

Flange Wizard 89754 Universal Magnetic Tape Holder #ad - Patented fall guard. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. It is a great little magnetic pocket level and your third hand when doing those difficult measuring jobs while working alone. It has been redesigned with No removable parts and works with most industrial measuring tapes.

Will secure the end of your tape while laying out close Tolerance measurements from the end or the center of your material.

More information about Flange Wizard 496-89754 #ad


Similar products



IRWIN Tools VISE-GRIP Extension Chain for 20R Locking Chain Clamp, 18-inch 40EXT

#ad
IRWIN 40EXT #ad - Quick action Lock washer. Folds up for storage ease. Vise parts replace damaged or worn-out parts. 2500-pound capacity. It is a great little magnetic pocket level and your third hand when doing those difficult measuring jobs while working alone. A strong 25 pound pull magnet set in epoxy secures the tape holder to your work.

Contact points stainless steel - a standard feature. Patented fall guard. Choose the appropriate size for your existing tool. Vise parts fit your existing 20R IRWIN VISE-GRIP locking tools. One piece construction - no loose pieces. One piece construction - no loose pieces. Quick action operation. Can be used on all standard weld neck flanges and great with slip-on flanges.

IRWIN Tools VISE-GRIP Extension Chain for 20R Locking Chain Clamp, 18-inch 40EXT #ad - Can be used on all standard weld neck flanges and great with slip-on flanges. Magnetic. The vise parts work with 20R locking chain clamps. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank. It has been redesigned with No removable parts and works with most industrial measuring tapes.

More information about IRWIN 40EXT #ad


Similar products



Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins, 5/8" - 1-5/8", Sold per Pair

#ad
Sumner Manufacturing SUM 781235 #ad - Choose the appropriate size for your existing tool. Folds up for storage ease. Quick action operation. 2500-pound capacity. Can be used on all standard weld neck flanges and great with slip-on flanges. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank.

Quick action operation. It is a great little magnetic pocket level and your third hand when doing those difficult measuring jobs while working alone. Patented fall guard. Vise parts replace damaged or worn-out parts. Contact points stainless steel - a standard feature. Qwik pins simple operation: 1 push the spring-loaded button 2 Separate pin from nut 3 Insert into top two flange holes 4 Push spring button and reinsert onto pin 5Quarter turn to tighten.

Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins, 5/8" - 1-5/8", Sold per Pair #ad - Contact points stainless steel - a standard feature. Acme threads for maximum clamping power and hardened steel for long lasting use. It has been redesigned with No removable parts and works with most industrial measuring tapes. Work as convenient reference points to level flange for tack and weld-out. Quick action Lock washer.

More information about Sumner Manufacturing SUM 781235 #ad


Similar products



63/64" - Flange Wizard 42050-TM Two Hole Pins, 5/16"

#ad
Flange Wizard 42050-TM #ad - Quick action Lock washer. One piece construction - no loose pieces. Quick action operation. Vise parts fit your existing 20R IRWIN VISE-GRIP locking tools. Choose the appropriate size for your existing tool. A strong 25 pound pull magnet set in epoxy secures the tape holder to your work. 2500-pound capacity. Can be used on all standard weld neck flanges and great with slip-on flanges.

Item weight: 05 lb. Patented fall guard. Use it as a protractor level, or remove and use the hardened center Punch for other marking jobs. Sturdy two hole pins are machined from hardened steel for added durability and longevity. Utilize fast double lead threads instead of acme threads for a more reliable hold over time.

63/64" - Flange Wizard 42050-TM Two Hole Pins, 5/16" #ad - Acme threads for maximum clamping power and hardened steel for long lasting use. Work as convenient reference points to level flange for tack and weld-out. One piece construction - no loose pieces. Contact points stainless steel - a standard feature. Designed to establish and mark a centerline at any angle around the circumference inside or outside on a Pipe or tank.

Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes.

More information about Flange Wizard 42050-TM #ad


Similar products



Flange Wizard WW-16 Wizard Wraps, 2 5/8" x 30", Heat Resistant, Small

#ad
Flange Wizard 496-WW-16 #ad - 2500-pound capacity. Brand name: Flange Wizard. Work as convenient reference points to level flange for tack and weld-out. Will secure the end of your tape while laying out close Tolerance measurements from the end or the center of your material. Contact points stainless steel - a standard feature. Quick action operation.

Contact points stainless steel - a standard feature. A strong 25 pound pull magnet set in epoxy secures the tape holder to your work. Fold-a-jack jack stand has a sturdy 1-Inch square tube base construction. Quick action Lock washer. Vise parts replace damaged or worn-out parts. Wizard wrap, made from a non-asbestos, heat resistant material, has a nice thick edge for easier more accurate marking and helps keep your soapstone from slipping.

Flange Wizard WW-16 Wizard Wraps, 2 5/8" x 30", Heat Resistant, Small #ad - 36 inch. Patented fall guard. One piece construction - no loose pieces. Quick action operation. Circumference & quartering Scale printed on every wrap-limits the need for calculation. Can be used on all standard weld neck flanges and great with slip-on flanges.

More information about Flange Wizard 496-WW-16 #ad


Similar products