Snap in Clips for 1/2 inch PEX Tubing, 130 Pieces

#ad
Noa Store #ad - Snap-in pipe clips can be used with PEX, copper and CPVC pipes and offer one of the most effective, versatile and reliable ways to secure tubing. Tubing offset from mounting surface. For tubing size: 1/2" CTS 5/8" OD. One of the most effective, versatile and reliable ways to secure tubing. Height without pipe installed: 3/4".

Snap-in clips can be used both for horizontal and vertical pipe runs and require a single flat-head fastener. Works both with flat head and round head screws.

More information about Noa Store #ad

Snap in Clips for 3/4" PEX Tubing 80/bag

#ad
Everhot HM-06723 #ad - Snap-in clips can be used both for horizontal and vertical pipe runs and require a single flat-head fastener. Cost-effective and labor-saving solution for any plumbing or radiant heating project. Screws are not included as you have to get the right length depending on how deep your stud or board is. Aftermarket part fit for pex, cpvc, copper pipe.

Snap-in pipe clips can be used with PEX, copper and CPVC pipes and offer one of the most effective, versatile and reliable ways to secure tubing. Pex snap-in clips are designed to allow for installation of clips prior to the installation of tubing. Snap-in clips can replace both types of pipe clamps - support type and regular straight type.

Snap in Clips for 3/4" PEX Tubing 80/bag #ad - This is extremely useful in overhead installation projects such as subloor radiant heating, where clips can be installed along the PEX tubing runs first and then pipe can easily be snapped into the clips. Recommended installation spacing is 24-30" for horizontal runs and 36-48" for vertical runs of tubing.

More information about Everhot HM-06723 #ad


Similar products



10 PIECES XFITTING HOT RED COLD BLUE OF 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE - 1/4" TURN LEAD-FREE BRASS 5 PIECES EACH

#ad
XFITTING #ad - Aftermarket part fit for pex, cpvc, copper pipe. Screws are not included as you have to get the right length depending on how deep your stud or board is. 400 psi. Xfitting will give our customers 30 days to try out ours confident products, if some how you don't like it you can mail it back to us we will refund your money back with no question to ask, NO RESTOCKING FEES and even pay for your return shipping fees.

10 PIECES XFITTING HOT RED COLD BLUE OF 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE - 1/4" TURN LEAD-FREE BRASS 5 PIECES EACH #ad - Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Approved to be used underground and behind walls without access panels. Cost-effective and labor-saving solution for any plumbing or radiant heating project. Xfitting hot and cold pex ball valve compatible with all types and brands of PEX Tubing - Watts, Bow, Nibco, Viega, Zurn, Everhot, etc.

Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution. Designed for hydronic heating as well as potable water distribution.

More information about XFITTING #ad


Similar products



Uponor Q4690512, 1/2 Inch ProPEX Ring w/ Stop, 1/2", 50-Pack

#ad
Uponor #ad - Uponor, heating/cooling, formerly known as Wirsbo, is a leading manufacturer and supplier of Plumbing, and Fire Safety Systems for residential and commercial building applications. Material: PEX-a lead-free. The q4690512 propex ring with stop, 1/2" are made from peX-a material, Uponor ProPEX Rings are required to make a proper ProPEX connection.

Screws are not included as you have to get the right length depending on how deep your stud or board is. For use with 1/2" Uponor AquaPEX tubing. Leading edge chamfer and stop edge simplifies the use of ProPEX fittings. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Cost-effective and labor-saving solution for any plumbing or radiant heating project.

Uponor Q4690512, 1/2 Inch ProPEX Ring w/ Stop, 1/2", 50-Pack #ad - Xfitting hot and cold pex ball valve compatible with all types and brands of PEX Tubing - Watts, Everhot, Nibco, Viega, Zurn, Bow, etc. Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution. Designed for hydronic heating as well as potable water distribution.

Each pack contains 50 ring. Aftermarket part fit for pex, cpvc, copper pipe. Approved to be used underground and behind walls without access panels.

More information about Uponor #ad


Similar products



ISPINNER 100pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-100pcs

#ad
XM #ad - Material: PEX-a lead-free. Approved to be used underground and behind walls without access panels. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Quantity: 50 pieces. Screws are not included as you have to get the right length depending on how deep your stud or board is. 400 psi.

Width x Thickness of clamp 7. 0 x 08mm● these clamps are universal and will work with any brand of crimp style pex fittings or peX tubing● Interlocking ring that forms a complete 360-Degree watertight seal● Perfect for connecting PEX to crimp type fittings in hard to reach spaces● Connect PEX to crimp type fittings in hard to reach spaces Aftermarket part fit for pex, cpvc, copper pipe.

ISPINNER 100pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-100pcs #ad - Cost-effective and labor-saving solution for any plumbing or radiant heating project. Xfitting hot and cold pex ball valve compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Bow, Nibco, Zurn, etc. Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution.

Designed for hydronic heating as well as potable water distribution. Quantity - 100pcs with plastic box packing. Application - connect PEX to crimp type fittings in hard to reach spaces. For use with 1/2" Uponor AquaPEX tubing.

More information about XM #ad


Similar products



SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass

#ad
SharkBite UC362LFA10 #ad - Quantity: 50 pieces. Leading edge chamfer and stop edge simplifies the use of ProPEX fittings. Cost-effective and labor-saving solution for any plumbing or radiant heating project. Xfitting hot and cold pex ball valve compatible with all types and brands of PEX Tubing - Watts, Zurn, Nibco, Everhot, Viega, Bow, etc.

Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution. Designed for hydronic heating as well as potable water distribution. Material - 304 stainless steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties.

SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass #ad - Size - 1/2 inch pex clamps, fit for 15. 0-17. 5mm pipe. Certified lead-free. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Application - connect PEX to crimp type fittings in hard to reach spaces. Compatible with stainless steel clamp & Copper Crimp ring systems. Resistant to corrosion due to dzr brass.

More information about SharkBite UC362LFA10 #ad


Similar products



SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass

#ad
SharkBite UC248LFA10 #ad - For use with 1/2" Uponor AquaPEX tubing. Material: PEX-a lead-free. Quantity - 100pcs with plastic box packing. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Resistant to corrosion due to dzr brass. 10 pack, or copper crimp rings and crimp tool, secure barb ends of fittings to pex pipe with tv #608-933 cinch clamps and tv #608-743 cinch tool, lead free brass barb insert elbow, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for Products Intended For The Transport Of Potable Water, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, 1/2", Immediately Testable To Well Over 100 PSI, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass #ad - 25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. 400 psi. Application - connect PEX to crimp type fittings in hard to reach spaces. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Approved to be used underground and behind walls without access panels.

More information about SharkBite UC248LFA10 #ad


Similar products



SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch

#ad
SharkBite 23102CP100 #ad - Leading edge chamfer and stop edge simplifies the use of ProPEX fittings. 400 psi. For use with 1/2" Uponor AquaPEX tubing. Use with cinch tool on cross link polyethylene PEX tubing connections. Astm f1807 nsf/ansi 61 Nsf 372. Quantity: 50 pieces. Quantity - 100pcs with plastic box packing. Push. The sharkbite connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology.

Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications. Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. Sharkbite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces.

SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch #ad - Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. Certified lead-free. Screws are not included as you have to get the right length depending on how deep your stud or board is. Compatible with stainless steel clamp & Copper Crimp ring systems.

Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results. Aftermarket part fit for pex, cpvc, copper pipe.

More information about SharkBite 23102CP100 #ad


Similar products



Pack of 2 EFIELD PEX 1/2INCH x 1/2INCH FEMALE NPT DROP-EAR ELBOW- FOR TRANSITION FROM PEX TO THREADED - 2 PIECES

#ad
EFIELD #ad - Resistant to corrosion due to dzr brass. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. 1/2" pex1/2"fpt drop Ear Elbow. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

Cost-effective and labor-saving solution for any plumbing or radiant heating project. Xfitting hot and cold pex ball valve compatible with all types and brands of PEX Tubing - Watts, Nibco, Everhot, Viega, Bow, Zurn, etc. Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution.

Pack of 2 EFIELD PEX 1/2INCH x 1/2INCH FEMALE NPT DROP-EAR ELBOW- FOR TRANSITION FROM PEX TO THREADED - 2 PIECES #ad - Designed for hydronic heating as well as potable water distribution. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Same/1 day handling time, using 1-3 days priority mail w.

Tracking # and insured. Material - 304 stainless steel, heat resistance, has good corrosion resistance, low temperature strength and mechanical properties. Size - 1/2 inch pex clamps, fit for 15.

More information about EFIELD #ad


Similar products



Happybuy PEX Pipe 2 Rolls of 1/2 Inch X 100 Feet Flexible Water Pipe Tubing Potable Water Pex Tubing

#ad
Happybuy #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Material - 304 stainless steel, heat resistance, has good corrosion resistance, low temperature strength and mechanical properties. Size - 1/2 inch pex clamps, fit for 15. 0-17. 5mm pipe. You can usually make long continuous runs, eliminating most elbows and joints.

Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Minimum bending radius: 5" industry standard for 1/2" pex; pressure ratings: 80 psi @ 200f, 100 psi @ 180F, 160 psi @ 73F By PPI; Maximum Working Pressure Psi : 086 mpa/Year. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

Happybuy PEX Pipe 2 Rolls of 1/2 Inch X 100 Feet Flexible Water Pipe Tubing Potable Water Pex Tubing #ad - Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Copper and CPVC piping. Hot/cold potable water distribution systems: Non-Barrier type PEX tubing is designed for use in hot and cold potable water distribution systems in residential, commercial and manufactured housing applications.

3. Advantages: pex plumbing pipe is cost-effective, flexible, durable and easy to install, making it a popular choice VS. Pex tube is an easy-to-install alternative to copper pipe.

More information about Happybuy #ad


Similar products



10 PIECES 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE LEAD-FREE

#ad
XFITTING #ad - Copper and CPVC piping. Hot/cold potable water distribution systems: Non-Barrier type PEX tubing is designed for use in hot and cold potable water distribution systems in residential, commercial and manufactured housing applications. 400 psi. Allows making proper ProPEX connection. Lead free compliant. Features - interlocking ring that forms a complete 360-Degree watertight seal.

Advantages: pex plumbing pipe is cost-effective, flexible, durable and easy to install, making it a popular choice VS. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications. Hot-forgged for Superior Stability and Strength. Certified lead-free.

10 PIECES 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE LEAD-FREE #ad - Approved to be used underground and behind walls without access panels. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. Same/1 day handling time, using 1-3 days priority mail w.

Tracking # and insured. Leading edge chamfer and stop edge simplifies the use of ProPEX fittings.

More information about XFITTING #ad


Similar products