SharkBite UC334LFA PEX Brass Drop Ear Elbow, 1/2-Inch x 1/2-Inch, Copper

#ad
SharkBite UC334LFA #ad - Cut. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times. Push. Sharkbite pex barb drop ear elbows are used to transition from PEX, to NPT threaded pipe, such as shower arms or tub spouts. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

When you insert a pipe into a sharkbite quick-connect fitting, the fitting's stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. Sharkbite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces.

SharkBite UC334LFA PEX Brass Drop Ear Elbow, 1/2-Inch x 1/2-Inch, Copper #ad - No soldering, no clamps, no glue. Done. The sharkbite connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.

. They are similar to female elbows, such as a stud or wall, but have mounting ears with holes for securing to a surface, and they provide additional stability. Versatile: sharkbite plumbing fittings fit copper, CTS, CPVC, and PEX pipe and connect all 4 types in any combination.

More information about SharkBite UC334LFA #ad

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass

#ad
SharkBite UC248LFA10 #ad - 10 pack, immediately testable to well over 100 psi, 1/2", lead free brass barb insert elbow, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, secure barb ends of fittings to pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass #ad - Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

Affordable: low cost solution to connect PEX Pipe Tubing. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

More information about SharkBite UC248LFA10 #ad


Similar products



Everflow HC012 Half Clamp J-Hook with Nail For Pex Tubing Pipe Support 50 Pack, 1/2", Black

#ad
Everflow HC012x50 #ad - Not recommended for CPVC. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Durable plastic construction to create the best piping support. Compatible with 1/2 in. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Pex tubing. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Comes as a pack of 50 to ensure maximum support. Not recommended for cpvc. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

Everflow HC012 Half Clamp J-Hook with Nail For Pex Tubing Pipe Support 50 Pack, 1/2", Black #ad - Everflow half clamps is made of durable plastic construction to create the best piping support. Compatible with 1/2 in. Pack of 50 Half clamp hanger design makes supporting and removing pipe easy.

More information about Everflow HC012x50 #ad


Similar products



SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass

#ad
SharkBite UC362LFA10 #ad - Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Certified lead-free. Pack of 50 The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Resistant to corrosion due to dzr brass. Compatible with stainless steel clamp & Copper Crimp ring systems. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass #ad - Durable plastic construction to create the best piping support. 10 pack, 1/2", immediately testable to well over 100 psi, or copper crimp rings and crimp tool, for connecting 3 pieces of 1/2" cross link polyethylene pex tubing, lead free brass barb insert tee, secure barb ends of fittings to pex pipe with tv #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Meets The New NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Pex tubing. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Compatible with pex tubing.

More information about SharkBite UC362LFA10 #ad


Similar products



Delta Other: MultiChoice Universal Shower Rough - Prefab PEX Crimp

#ad
Delta R10000-PFS-PX #ad - Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Product type: shower roughs - style: modern/contemporary - Material: Brass - Made In: USA - Warranty: Limited Lifetime Warranty.

Certified lead-free. Delta r10000-pfs-px features: multichoice® universal valve body only accepts single, dual, or dual thermostatic cartridge Cartridge ships with trim Back-to-back capability Features blocked tub port and PEX shower riser Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

Delta Other: MultiChoice Universal Shower Rough - Prefab PEX Crimp #ad - Affordable: low cost solution to connect PEX Pipe Tubing. Astm f1807 nsf/ansi 61 Nsf 372. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Compatible with pex tubing. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Not recommended for CPVC. Durable plastic construction to create the best piping support.

More information about Delta R10000-PFS-PX #ad


Similar products



SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch

#ad
SharkBite 23102CP100 #ad - Durable plastic construction to create the best piping support. Use with cinch tool on cross link polyethylene PEX tubing connections. Sharkbite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications.

Resistant to corrosion due to dzr brass. The sharkbite 100 pack, 1/2 inch, pEX Cinch Barb Crimps make PEX barb fitting connections. The sharkbite connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. Cut. After crimping you can immediately test each fitting to well over 100 PSI.

SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch #ad - Pex tubing. After crimping you can immediately test each fitting to well over 100 PSI. Compatible with pex tubing. Astm f1807 nsf/ansi 61 Nsf 372. Compatible with 1/2 in. Not recommended for CPVC. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

More information about SharkBite 23102CP100 #ad


Similar products



SharkBite UC120LFA10 1/2" Male PEX Barb Fitting 10-Pack, Brass

#ad
SharkBite UC120LFA10 #ad - Astm f1807 nsf/ansi 61 Nsf 372. Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. Not recommended for CPVC. Half clamp hanger design makes supporting and removing pipe easy. Push. When you insert a pipe into a sharkbite quick-connect fitting, the fitting's stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal.

Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.

SharkBite UC120LFA10 1/2" Male PEX Barb Fitting 10-Pack, Brass #ad - Compatible with pex tubing. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Product type: shower roughs - style: modern/contemporary - Material: Brass - Made In: USA - Warranty: Limited Lifetime Warranty.

Versatile: sharkbite plumbing fittings fit copper, CPVC, CTS, and PEX pipe and connect all 4 types in any combination. Lead-free: made of high-quality forged DZR brass that is lead-free.

More information about SharkBite UC120LFA10 #ad


Similar products



Delta Faucet R10000-PXWS, 4.88 x 5.06 x 4.88 inches

#ad
Delta Faucet R10000-PXWS #ad - Pack of 50 Valve body only: valve body only, required cartridge is included with your Delta shower trim of choice. Complete flexibility: delta's multichoice universal valve gives you the flexibility to upgrade or change your shower trim without altering plumbing behind the wall because it is compatible with most Delta single-function 13 or 14 series, dual-function 17 series, or dual-function themostatic 17T series trim kits.

Back-to-back capabilities: Back-to-back installation capability for multi-unit buildings. Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.

Delta Faucet R10000-PXWS, 4.88 x 5.06 x 4.88 inches #ad - Resistant to corrosion due to dzr brass. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

Compatible with stainless steel clamp & Copper Crimp ring systems. Pex tubing. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

More information about Delta Faucet R10000-PXWS #ad


Similar products



SharkBite UC953CP100 1/2" PEX Barb Clamp Ring 100-Pack, Pack of 1

#ad
SharkBite UC953CP100 #ad - The sharkbite connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. Valve body only: valve body only, required cartridge is included with your Delta shower trim of choice. Installs in seconds: No soldering, or glue; Just push to create a watertight seal. Lifetime limited warranty: you can install with confidence, knowing Delta's MultiChoice Universal Valve is backed by Delta Faucet's Lifetime Limited Warranty.

Push. Screwdriver stops are conveniently included. Sharkbite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

SharkBite UC953CP100 1/2" PEX Barb Clamp Ring 100-Pack, Pack of 1 #ad - Affordable: low cost solution to connect PEX Pipe Tubing. Versatile: compatible with stainless steel clamp and copper crimp ring systems. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Compatible with pex tubing. Connection types: hot and cold inlets machined for PEX crimp connections and 1/2-inch universal outlets with male threads.

More information about SharkBite UC953CP100 #ad


Similar products



PEX Pipe Cutters for Cutting 1/8"-1-inch PEX Tubings, not for PVC Pipes

#ad
Iwiss Electric Co., Ltd 55045 #ad - Spring loaded handle for quick opening/fast cutting. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications. Not recommended for CPVC. High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.

Compatible with 1/2 in. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Installs in seconds: No soldering, or glue; Just push to create a watertight seal. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Cuts pex pipe from 1/8"-1"2. High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.

PEX Pipe Cutters for Cutting 1/8"-1-inch PEX Tubings, not for PVC Pipes #ad - Connection types: hot and cold inlets machined for PEX crimp connections and 1/2-inch universal outlets with male threads. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times. Pex tubing. Astm f1807 nsf/ansi 61 Nsf 372. Complete flexibility: delta's multichoice universal valve gives you the flexibility to upgrade or change your shower trim without altering plumbing behind the wall because it is compatible with most Delta single-function 13 or 14 series, dual-function 17 series, or dual-function themostatic 17T series trim kits.

More information about Iwiss Electric Co., Ltd 55045 #ad


Similar products



SharkBite 23102CP25 Crimp Ring, 1/2 inch, Pack of 25

#ad
SharkBite 23102CP25 #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection. Astm f1807 nsf/ansi 61 Nsf 372. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Product type: shower roughs - style: modern/contemporary - Material: Brass - Made In: USA - Warranty: Limited Lifetime Warranty. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

SharkBite 23102CP25 Crimp Ring, 1/2 inch, Pack of 25 #ad - Affordable: low cost solution to connect PEX Pipe Tubing. Compatible with 1/2 in. Compatible with pex tubing. Valve body only: valve body only, required cartridge is included with your Delta shower trim of choice. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. Connection types: hot and cold inlets machined for PEX crimp connections and 1/2-inch universal outlets with male threads. Lead-free: made of high-quality forged DZR brass that is lead-free.

More information about SharkBite 23102CP25 #ad


Similar products