ROOFTOP SLEEPER SUPPORT PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

#ad
ROOFTOP SLEEPER SUPPORT #ad - Each unit is 3' long x 4. 875" wide x 3. 5" tall and can be cut to any desired length. The rooftop sleeper support rsS-3 is a rooftop support block or stand that can be cut to desired length using various saws. Pipes can be affixed to the support block using pipe guides, clamps, tab tape and other types of user-provided hardware.

Per 6" of support. This rooftop pipe support is made of extruded, 100% recycled PVC. Used to support rooftop water lines, condensate lines, electrical conduit, gas lines, and other types of rooftop plumbing. Suggested minimum length is 6" 152. 4 mm to provide adequate stability. Space the rooftop pipe supports in accordance with local code or specification requirement for the component being support.

ROOFTOP SLEEPER SUPPORT PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC #ad - Consult the roofing manufacturer for maximum allowable roof load. Improper installation may cause pipe stand damage or failure and damage to the pipe or roof surface. Ultimate loading of the rooftop pipe support should not exceed 50 lbs. When using as a pipe support, manufacturer recommended spacing is 10 feet on center, not to exceed max load per roofing manufacturer.

Continual maintenance is not required, pipe alignment, but semi-annual inspection is recommended to check for proper pipe stand position, weight distribution and installation. Can be cut to desired lengths | Suggested minimum length is 6" 152.

More information about ROOFTOP SLEEPER SUPPORT #ad

4 Pack | 6" Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

#ad
ROOFTOP SLEEPER SUPPORT RSS0.5_cs4 #ad - The rooftop Sleeper Support RSS05 is a rooftop support block or stand that is pre-cut to 6" 152. 4 mm length. Improper installation may cause pipe stand damage or failure and damage to the pipe or roof surface. Pipes can be affixed to the support block using pipe guides, clamps, tab tape and other types of user-provided hardware.

Support water lines, condensate Lines, Electrical Conduit, Plumbing Pipes, Gas Pipes, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Clamps, Tab Tape, or Other Hardware not included. Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable. Ultimate loading of the rooftop pipe support should not exceed 50 lbs.

4 Pack | 6" Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC #ad - Each unit is 6" long x 4. 875" wide x 3. 5" tall and is pre-cut. Continual maintenance is not required, pipe alignment, but semi-annual inspection is recommended to check for proper pipe stand position, weight distribution and installation. These pre-cut 6" pipe supports are already the minimum length necessary to provide adequate stability and should not be cut to smaller lengths.

When using as a pipe support, manufacturer recommended spacing is 10 feet on center, not to exceed max load per roofing manufacturer. Consult the roofing manufacturer for maximum allowable roof load.

More information about ROOFTOP SLEEPER SUPPORT RSS0.5_cs4 #ad


Similar products



9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

#ad
ROOFTOP SLEEPER SUPPORT #ad - Can be cut to desired lengths | Suggested minimum length is 6" 152. 4 mm to provide adequate stability. Support water lines, condensate Lines, Plumbing Pipes, Gas Pipes, electrical Conduit, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Clamps, Tab Tape, or Other Hardware not included.

Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable. Consult the roofing manufacturer for maximum allowable roof load. Each unit is 3' long x 4. 875" wide x 3. 5" tall and can be cut to any desired length. When using as a pipe support, manufacturer recommended spacing is 10 feet on center, not to exceed max load per roofing manufacturer.

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC #ad - . The rooftop sleeper support rsS-3 is a rooftop support block or stand that can be cut to desired length using various saws. Support water lines, electrical Conduit, Gas Pipes, Plumbing Pipes, condensate Lines, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Clamps, Tab Tape, or Other Hardware not included.

Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable. Pipes can be affixed to the support block using pipe guides, clamps, tab tape and other types of user-provided hardware. This rooftop pipe support is made of extruded, 100% recycled PVC.

More information about ROOFTOP SLEEPER SUPPORT #ad


Similar products



8 Pack | Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable

#ad
ROOFTOP SLEEPER SUPPORT RSS_SS Base Only_cs8 #ad - Design covered by United States Design Patent No. Us d837, 638 s popular rooftop sleeper support already Pre-Cut to 6" 152. 4 mm length | cost Effective Rooftop Pipe Support Solution. Each pipe stand will accommodate up to a 3 inch schedule 40 customary or "trade" size pipe. Support gas pipes, Plumbing Pipes, electrical Conduit, Refrigeration Pipes.

Unique design Absorbs Thermal Expansion and Contraction. Support water lines, plumbing Pipes, condensate Lines, Gas Pipes, Electrical Conduit, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Clamps, Tab Tape, or Other Hardware not included. Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable.

8 Pack | Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable #ad - A rooftop support block or stand used to support rooftop gas pipes, satellites, electrical conduit, cable tray, antennas, solar arrays, disconnects, and junction boxes. Made of 100% recycled plastic | uv resistant | Made in the USA | Versatile | Durable | Affordable. The saddle support can also be used in mechanical, HVAC, plumbing, refrigeration, and electrical applications.

Patented design | prevents damage to roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed. The maximum outside diameter of the pipe that can be cradled in the Saddle Support is 3. 25".

More information about ROOFTOP SLEEPER SUPPORT RSS_SS Base Only_cs8 #ad


Similar products



Tjernlund AS1 AireShare Room-To-Room Fan Ventilator, Hardwired,70 CFM

#ad
Tjernlund AS1 #ad - Transfer air through interior walls from room to room. Popular rooftop sleeper support already Pre-Cut to 6" 152. 4 mm length | cost Effective Rooftop Pipe Support Solution. Dimensions - diffuser:3 inches x 15 1/8 inches flush, diffuser rough opening: 1 1/4 inches Height x 13 5/8 inches Width Blower Grille: 7 3/4 inches x 15 3/4 inches flush Blower Rough Opening: 4 7/8 inches Height x 13 7/8 inches Width.

Quiet, low watt blower. Patented design | prevents damage to roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed. Case of 9 Supports. Requires hard wiring to 120 VAC. Staggered intake and discharge stop light and reduce room to room sound transfer. Extend comfort from ductless split systems and PTAC’s to rooms without air handlers.

Tjernlund AS1 AireShare Room-To-Room Fan Ventilator, Hardwired,70 CFM #ad - Made of 100% recycled plastic | uv resistant | Made in the USA | Versatile | Durable | Affordable. Support gas pipes, Plumbing Pipes, electrical Conduit, Refrigeration Pipes. Unique design Absorbs Thermal Expansion and Contraction. Quiet tangential blower fits into walls as little as 3” deep. Can be cut to desired lengths | Suggested minimum length is 6" 152.

More information about Tjernlund AS1 #ad


Similar products



Klein Tools VDV226-005 Compact Pass-Thru Crimper, Modular Crimper for Pass-Thu RJ45 Data Plugs

#ad
Klein Tools VDV226-005 #ad - Can be cut to desired lengths | Suggested minimum length is 6" 152. 4 mm to provide adequate stability. Support water lines, gas pipes, Condensate Lines, Plumbing Pipes, electrical Conduit, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Tab Tape, Clamps, or Other Hardware not included.

Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable. Requires hard wiring to 120 VAC. Quiet, low watt blower. Transfer air through interior walls from room to room. Use with ductless cooling and heating to transfer comfort to adjacent rooms. Klein tools compact Pass-Thru Modular Crimper.

Klein Tools VDV226-005 Compact Pass-Thru Crimper, Modular Crimper for Pass-Thu RJ45 Data Plugs #ad - Compact pass-thru modular crimper Popular rooftop sleeper support already Pre-Cut to 6" 152. 4 mm length | cost Effective Rooftop Pipe Support Solution. Patented design | prevents damage to roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed. Staggered intake and discharge stop light and reduce room to room sound transfer.

Support gas pipes, Plumbing Pipes, electrical Conduit, Refrigeration Pipes. Unique design Absorbs Thermal Expansion and Contraction.

More information about Klein Tools VDV226-005 #ad


Similar products



DEWALT 20V MAX SDS Rotary Hammer Drill, Tool Only DCH273B

#ad
Dewalt DCH273B #ad - This is a bare tool item - battery sold separately. 2. 1 joules impact energy which provides corded power without the cord. Active vibration Control which significantly reduces vibration. Requires hard wiring to 120 VAC. Retractable utility hook for convenient hanging and storage. Battery & Charger Sold Separately.

Quiet, low watt blower. Klein tools compact Pass-Thru Modular Crimper. It also has a retractable utility hook for convenient hanging and storage. Optimal concrete drilling-5/32 - 1/2 inch. Popular rooftop sleeper support already Pre-Cut to 6" 152. 4 mm length | cost Effective Rooftop Pipe Support Solution. Includes: 360 degree side Handle, Depth Rod, Retractable Utility Hook.

DEWALT 20V MAX SDS Rotary Hammer Drill, Tool Only DCH273B #ad - Support gas pipes, electrical Conduit, Plumbing Pipes, Refrigeration Pipes. Unique design Absorbs Thermal Expansion and Contraction. Patented design | prevents damage to roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed. The dewalt dch273b 20v max brushless sds rotary hammer Bare tool features a DEWALT brushless motor for extended runtime and durability.

Chuck type-SDS+. Requires wall switch or thermostat not included.

More information about Dewalt DCH273B #ad


Similar products



Packard C230B 2 Pole 30 Amp Contactor, 120 Voltage Coil

#ad
Packard C230B #ad - Dimensions - diffuser:3 inches x 15 1/8 inches flush, diffuser rough opening: 1 1/4 inches Height x 13 5/8 inches Width Blower Grille: 7 3/4 inches x 15 3/4 inches flush Blower Rough Opening: 4 7/8 inches Height x 13 7/8 inches Width. Made of 100% recycled plastic | uv resistant | Made in the USA | Versatile | Durable | Affordable.

Packard C230B 2 Pole 30 Amp Contactor, 120 Voltage Coil #ad - Makes great Ships Ladder Base Support. Support gas pipes, electrical Conduit, Plumbing Pipes, Refrigeration Pipes. Unique design Absorbs Thermal Expansion and Contraction. Requires wall switch or thermostat not included. Case of 9 Supports. Requires hard wiring to 120 VAC. Contactors meet specifications for devices up to 600 VAC.

Use with ductless cooling and heating to transfer comfort to adjacent rooms. Quiet, low watt blower. Transfer air through interior walls from room to room. Optimal concrete drilling-5/32 - 1/2 inch. Blows/min- 0 - 4, 600 bpm. C230b/ tjt30a120v2p/17325/pc230a/h230a/90-244.

More information about Packard C230B #ad


Similar products



Dual Entry - Morris Products Black Insulated 2 Conductor Splice Connector - Pre-Filled, Easy Entry, Rubber Vinyl Coating, 2 Set Screws - 3/0-6 Wire Range, 1/4 Allen Hex - 2.18"L x 2.48"W x 2.37"H

#ad
Morris Products 97117 #ad - Options include slotted, ¼, 1/0-14, 350-6, 3/16, 2-14, 500-6, 5/16 and 3/8 Allen Hex. Collection of comprehensive electrical tools: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.

Battery & Charger Sold Separately. 2. 1 joules impact energy which provides corded power without the cord. Requires wall switch or thermostat not included. The 600-volt cable conductor is 6061-T6 Aluminum CU9AL dual rated for use with copper and aluminum wires. Wire range options: choose from 2-conductor splice connectors with wire ranges of 4-14, 3/0-6, 250-6, 2/0-6, 600-250 and 750-250.

Dual Entry - Morris Products Black Insulated 2 Conductor Splice Connector - Pre-Filled, Easy Entry, Rubber Vinyl Coating, 2 Set Screws - 3/0-6 Wire Range, 1/4 Allen Hex - 2.18"L x 2.48"W x 2.37"H #ad - Dimensions - diffuser:3 inches x 15 1/8 inches flush, diffuser rough opening: 1 1/4 inches Height x 13 5/8 inches Width Blower Grille: 7 3/4 inches x 15 3/4 inches flush Blower Rough Opening: 4 7/8 inches Height x 13 7/8 inches Width. Transfer air through interior walls from room to room. Resistive Amps : 40

No load speed 0 - 1, 100 rpm. Case of 9 Supports. Established in 1994, morris Products is headquartered in Queensboro, New York.

More information about Morris Products 97117 #ad


Similar products



DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 24 TPI, 3-Pack DW3984C

#ad
Dewalt DW3984C #ad - Made of 100% recycled plastic | uv resistant | Made in the USA | Versatile | Durable | Affordable. Optimal concrete drilling-5/32 - 1/2 inch. Includes lug, spade terminals, and covers. Dimensions - diffuser:3 inches x 15 1/8 inches flush, diffuser rough opening: 1 1/4 inches Height x 13 5/8 inches Width Blower Grille: 7 3/4 inches x 15 3/4 inches flush Blower Rough Opening: 4 7/8 inches Height x 13 7/8 inches Width.

Staggered intake and discharge stop light and reduce room to room sound transfer. Chuck type-SDS+. Support gas pipes, electrical Conduit, Plumbing Pipes, Refrigeration Pipes. Unique design Absorbs Thermal Expansion and Contraction. Requires hard wiring to 120 VAC. Can be cut to desired lengths | Suggested minimum length is 6" 152.

DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 24 TPI, 3-Pack DW3984C #ad - 4 mm to provide adequate stability. Support water lines, electrical Conduit, Gas Pipes, Condensate Lines, Plumbing Pipes, Refrigeration Pipes. Affix pipes to support block with Pipe Guides, Tab Tape, Clamps, or Other Hardware not included. Made of 100% recycled pvc | made in the USA | Versatile | Durable | Affordable.

Blows/min- 0 - 4, 600 bpm. Patented design | prevents damage to roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed.

More information about Dewalt DW3984C #ad


Similar products



Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable

#ad
ROOFTOP SLEEPER SUPPORT #ad - Includes lug, spade terminals, and covers. Size: 32-7/8" x 0020" 24 tpi. 508 "industrial control equipment". Case of 9 Supports. A rooftop support block or stand used to support rooftop gas pipes, antennas, satellites, cable tray, disconnects, electrical conduit, solar arrays, and junction boxes. Heavy duty insulation: each black insulated 2 conductor splice connector for various wire ranges is insulated with rugged, high-dielectric rubber and vinyl coating for long-term use.

Easy re-entry: these dual-entry insulated 2-conductor splice connectors offer easy re-entry for inspection, troubleshooting, changes and low-cost installations. Pre-filled: morris products' black insulated conductor splice connectors are pre-filled with oxide inhibitor and offer a temperature range of -49 to 194 degrees F.

Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable #ad - Brushless motor for extended runtime and durability. Each pipe stand will accommodate up to a 3 inch schedule 40 customary or "trade" size pipe. Use with ductless cooling and heating to transfer comfort to adjacent rooms. In accordance with u. Transfer air through interior walls from room to room. Klein tools compact Pass-Thru Modular Crimper.

Dimensions - diffuser:3 inches x 15 1/8 inches flush, diffuser rough opening: 1 1/4 inches Height x 13 5/8 inches Width Blower Grille: 7 3/4 inches x 15 3/4 inches flush Blower Rough Opening: 4 7/8 inches Height x 13 7/8 inches Width.

More information about ROOFTOP SLEEPER SUPPORT #ad


Similar products