Pexflow PSFA1212-5 Female Sweat Copper Adapter X Pex Barb Pipe Fitting, 1/2 x1/2, Brass, 5 pack

#ad
Everflow PSFA1212-5 #ad - Easy to use: fittings Work with Crimp Ring or Clamp Connection Methods. These fittings allow you to connect with either a stainless steel clamp system, or a copper crimp ring system on one side, and the other side is a sweat connection that can be soldered. High quality: constructed of lead free DZR brass for superior reliability and strength.

For use with pex tubing and Male Copper connections. Rated to 200°f and 200 psi. Pex barb sweat adapter is made of a lead-free DZR brass, and is an easy to install, low-cost solution to connect to PEX tubing. Nsf, upc and csa approved, manufactured to ASTM standard F1807.

More information about Everflow PSFA1212-5 #ad

Everflow HC012 Half Clamp J-Hook with Nail For Pex Tubing Pipe Support 50 Pack, 1/2", Black

#ad
Everflow HC012x50 #ad - Not recommended for CPVC. Half clamp hanger design makes supporting and removing pipe easy. Pex tubing. Not recommended for cpvc. Pack of 50 Everflow half clamps is made of durable plastic construction to create the best piping support. Comes as a pack of 50 to ensure maximum support. Compatible with 1/2 in. Pex tubing, copper, and most other pipes.

Compatible with 1/2 in. Durable plastic construction to create the best piping support. Half clamp hanger design makes supporting and removing pipe easy.

More information about Everflow HC012x50 #ad


Similar products



SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass

#ad
SharkBite UC248LFA10 #ad - Pack of 50 Not recommended for CPVC. Compatible with 1/2 in. Durable plastic construction to create the best piping support. 10 pack, secure barb ends of fittings to pex pipe with tv #608-933 cinch clamps and tv #608-743 cinch tool, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, immediately testable To Well Over 100 PSI, 1/2", Or Copper Crimp Rings and Crimp Tool, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Lead Free Brass Barb Insert Elbow, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass #ad - Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Half clamp hanger design makes supporting and removing pipe easy. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Pex tubing.

More information about SharkBite UC248LFA10 #ad


Similar products



2 PIECES - Pack of 2 EFIELD PEX 1/2INCH x 1/2INCH FEMALE NPT DROP-EAR ELBOW- FOR TRANSITION FROM PEX TO THREADED

#ad
EFIELD #ad - Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. 1/2" pex1/2"fpt drop Ear Elbow. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Nsf cl-r certified for use in potable hot-water Systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated Durable plastic construction to create the best piping support.

Pack of 50 Efield pex barb drop ear elbows: for use to transition from pex to Non-PEX Tubing threaded pipes, such as shower arms or tub spoutsSimilar to a female elbow but has mounting brace with holes for binding to a secure surface. Lead Free Brass. 2 pack. Half clamp hanger design makes supporting and removing pipe easy.

2 PIECES - Pack of 2 EFIELD PEX 1/2INCH x 1/2INCH FEMALE NPT DROP-EAR ELBOW- FOR TRANSITION FROM PEX TO THREADED #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Lead free compliant. The efield pex drop ear fittings are compatible for potable water distribution and Radiant heating applications. These fittings can be used in both stainless steel crimps or a copper crimp ring.

1/2" x 1/2" efield drop-ear elbow is lead freeUse for transition of PEX to NPT threaded pipe.

More information about EFIELD #ad


Similar products



Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50

#ad
Everflow Supplies PXKT-CR12-50 #ad - Additionally, although these clamps come in a wide variety of sizes, they use the same type of crimping tool. Construction the corrosion resistance of the stainless-steel construction also means that these clamps are suited for use in a wide variety of applications. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing. The pex stainless steel Cinch Clamps are designed to provide long-lasting strength. Others there are many other amazing features and benefits that come with these stainless-steel cinch clamps. Due to the fact that this ring s design is so compact, it is perfect for use in tight spaces including those that a normal crimp tool would not typically reach.

Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50 #ad - Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 The clamps are also sturdy and of a high quality. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

Affordable: low cost solution to connect PEX Pipe Tubing. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

More information about Everflow Supplies PXKT-CR12-50 #ad


Similar products



SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch

#ad
SharkBite 23102CP100 #ad - Lead free compliant. Hot-forgged for Superior Stability and Strength. Durable plastic construction to create the best piping support. No soldering, no crimps, no glue. Done. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. The sharkbite connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology.

Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results. Use with cinch tool on cross link polyethylene PEX tubing connections. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch #ad - Pex tubing. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. 2 pack. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Half clamp hanger design makes supporting and removing pipe easy. Special features: perfect for connecting PEX to crimp type fittings in hard to reach spaces.

More information about SharkBite 23102CP100 #ad


Similar products



Litorange 1/2 inch T PEX Tee & 90 Degree Elbow & Straight Coupling 1/2" pack of 12 Lead Free Brass Barb Crimp Pipe Fitting/Fittings

#ad
Litorange #ad - Half clamp hanger design makes supporting and removing pipe easy. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal.

. 1/2" pex elbow fitting. Compatible:watts;everhot;Viega;etc. 4 pcs 1/2" pex elbow fitting. Not recommended for CPVC. Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. Durable plastic construction to create the best piping support. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Litorange 1/2 inch T PEX Tee & 90 Degree Elbow & Straight Coupling 1/2" pack of 12 Lead Free Brass Barb Crimp Pipe Fitting/Fittings #ad - Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Package include: 4 pcS 1/2" PEX Tee fitting. Pex tubing. 1/2" pex coupling fitting. Hot-forgged for Superior Stability and Strength. Pack of 50

More information about Litorange #ad


Similar products



Pexflow PFW-B12100 PEX Potable Water Tubing Non-Barrier Pipe, 1/2 Inch x 100 Feet, Blue

#ad
Pexflow PFW-B12100 #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Tubing is marked every 5 feet and nsf certified for potable water use, lead-free and meets or exceeds the ASTM F2023 standard. It can also be used for hot water delivery as well, but most use red PEX tubing for hot water systems.

Markings - pex tubing markings unique feature imprints common standards and ratings making it easy to understand tubing properties. Made of "silane" or "moisture cure" method of cross-linking where links between the molecules of the HDPE polymer are formed after the extrusion process. Suitable for new or retrofit construction and for hot or cold water distribution.

Pexflow PFW-B12100 PEX Potable Water Tubing Non-Barrier Pipe, 1/2 Inch x 100 Feet, Blue #ad - Package include: 4 pcs 1/2" pex tee fitting. Durable plastic construction to create the best piping support. The color of blue tubing helps identify the pipe as cold water line in PEX plumbing systems. Not recommended for CPVC. Pex type: pex b / pex tubing size: 1/2 inch / outside diameter: 0625 / color: 1 x blue / inside diameter:0

475 inch / total length: 1 x 100 feet / coiled: yes / pressure ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F. Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal.

More information about Pexflow PFW-B12100 #ad


Similar products



SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass

#ad
SharkBite UC362LFA10 #ad - To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Pack of 50 Hot-forgged for Superior Stability and Strength. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

Lead free compliant. Flexible - ability to bend pipe making it easy to work with the bend radius of 5 feet. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. 1/2" pex1/2"fpt drop Ear Elbow. Certified lead-free. Markings - pex tubing markings unique feature imprints common standards and ratings making it easy to understand tubing properties.

SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass #ad - Compatible with pex tubing. 4 pcs 1/2" peX coupling fitting. Durable plastic construction to create the best piping support. Special features: perfect for connecting PEX to crimp type fittings in hard to reach spaces. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Compatible with 1/2 in.

More information about SharkBite UC362LFA10 #ad


Similar products



Pexflow PXLN0012-10 PEX X PEX 90 Degree Elbow Barb Pipe Fitting 1/2" Brass pack of 10

#ad
Everflow PXLN0012-10 #ad - Astm f1807 nsf/ansi 61 Nsf 372. 2 pack. Certified for use in potable water applications. Resists corrosion and mineral buildup, rust, and freeze damage. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

Lead free compliant. Suitable for new or retrofit construction and for hot or cold water distribution. Package include: 4 pcs 1/2" pex tee fitting. Lead free compliant brass. Easily installed without flame, or solder and requires no bonding agents, flux, glue, or solvents.1/2" pex tee fitting. High quality: constructed of lead free DZR brass for superior reliability and strength.

Pexflow PXLN0012-10 PEX X PEX 90 Degree Elbow Barb Pipe Fitting 1/2" Brass pack of 10 #ad - Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. 1/2" pex1/2"fpt drop Ear Elbow. Compatible with pEX pipe size 1/2 pack of 10

More information about Everflow PXLN0012-10 #ad


Similar products



ISPINNER 50pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-50pcs

#ad
XM #ad - Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings. Attention▲▲▲▲▲▲please use correct pex cinch clamp crimping tool. We will not be responsible for breaks due to incorrect and rough use. Attention▲▲▲▲▲▲【features】● 1/2-inch stainless steel pex cinch clamps with plastic box packing - 50pcs● 1/2 PEX clamps fit for 15.

0-17. 5mm pipe. Material - 304 stainless steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. Size - 1/2 inch pex clamps, fit for 15. 0-17. 5mm pipe. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

ISPINNER 50pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-50pcs #ad - Resistant to corrosion due to dzr brass. Compatible with pex tubing. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Special features: perfect for connecting PEX to crimp type fittings in hard to reach spaces.

Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing.

More information about XM #ad


Similar products