Pexflow EPCP0012-10 PEX X PEX Straight Coupling Barb Pipe Fitting, 1/2″, Brass 10 pack

#ad
Everflow EPCP0012-10 #ad - Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI. The pexflow pex barb fitting range offers a wide variety of Fittings, Manifolds, clamp rings, Valves, crimp rings and tools in various sizes to help complete your next plumbing project. Compatible with pEX pipe size 1/2 pack of 10

Pexflow pex barb fittings are compatible for potable water distribution and hydronic heating applications. High quality: constructed of lead free DZR brass for superior reliability and strength. Nsf, upc and csa approved, manufactured to ASTM standard F1807. Easy to use: fittings Work with Crimp Ring or Clamp Connection Methods.

Pexflow EPCP0012-10 PEX X PEX Straight Coupling Barb Pipe Fitting, 1/2", Brass 10 pack #ad - These pex fittings may be used with the stainless steel clamp system or the copper crimp ring system both sold separately. The pexflow pex barb coupling 10-Pack is an easy to install, low cost solution to connect PEX Pipe.

More information about Everflow EPCP0012-10 #ad

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass

#ad
SharkBite UC248LFA10 #ad - The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. 10 pack, lead free brass barb insert elbow, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, for connecting 2 pieces of 1/2" cross link polyethylene pex tubing, 1/2", secure barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, Immediately Testable To Well Over 100 PSI, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, 10 Pack, Brass #ad - 25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

More information about SharkBite UC248LFA10 #ad


Similar products



Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50

#ad
Everflow Supplies PXKT-CR12-50 #ad - You should be able to use it to fix your radiant heating, domestic water, and other applications in and around your home. This prevents them from sliding/going further down the pipe. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Additionally, it ensures that you have an easier time working on your installations.

Simply pinch the tab closed with the Cinch Tool to make the connection. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. The grip clamps also come slightly pre-crimped from the factory.

Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50 #ad - This is especially so for individuals who are not professional plumbers. Therefore, you don t have to be experienced with plumbing to work with them. Construction the corrosion resistance of the stainless-steel construction also means that these clamps are suited for use in a wide variety of applications.

. Not only are they durable, they are also easy to use. This is why most homeowners looking for an ideal tool for their general plumbing repairs choose the stainless steel 1/2 cinch clamps over other products in the market. The clamps are also sturdy and of a high quality.

More information about Everflow Supplies PXKT-CR12-50 #ad


Similar products



SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass

#ad
SharkBite UC362LFA10 #ad - Certified lead-free. Compatible with pex tubing. 10 pack, 1/2", for connecting 3 pieces of 1/2" cross link polyethylene pex tubing, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, lead free brass barb insert tee, immediately Testable To Well Over 100 PSI, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

SharkBite UC362LFA10 1/2" Tee PEX Barb Fitting 10-Pack, 1, Brass #ad - Affordable: low cost solution to connect PEX Pipe Tubing. Astm f1807 nsf/ansi 61 Nsf 372. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing.

More information about SharkBite UC362LFA10 #ad


Similar products



SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch

#ad
SharkBite 23102CP100 #ad - Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. No soldering, no crimps, no glue. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal.

. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

SharkBite PEX Pipe Crimp Ring 1/2 Inch, Plumbing Fittings, Pack of 100, 23102CP100, 1/2-Inch #ad - Resistant to corrosion due to dzr brass. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Cut. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

More information about SharkBite 23102CP100 #ad


Similar products



Everflow HC012 Half Clamp J-Hook with Nail For Pex Tubing Pipe Support 50 Pack, 1/2", Black

#ad
Everflow HC012x50 #ad - Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Half clamp hanger design makes supporting and removing pipe easy. Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing. Resistant to corrosion due to dzr brass. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Pex tubing, copper, and most other pipes.

Everflow HC012 Half Clamp J-Hook with Nail For Pex Tubing Pipe Support 50 Pack, 1/2", Black #ad - Pex tubing. Compatible with stainless steel clamp & Copper Crimp ring systems. Comes as a pack of 50 to ensure maximum support. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal. Compatible with 1/2 in.

Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

More information about Everflow HC012x50 #ad


Similar products



SUNGATOR 25-Pack 1/2 Inch 90 Degree Elbow PEX Fittings, Lead Free Brass Crimp for PEX Pipe in Plumbing Jobs

#ad
SUNGATOR #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Compatible fastening use with stainless steel clamp rings, or PEX Crimp tool and copper rings. Clamp rings are not included in this set. Package includes 1/2inch x 1/2inch elbow pex fittings 25 pcS Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

SUNGATOR 25-Pack 1/2 Inch 90 Degree Elbow PEX Fittings, Lead Free Brass Crimp for PEX Pipe in Plumbing Jobs #ad - Affordable: low cost solution to connect PEX Pipe Tubing. Certified lead-free. Half clamp hanger design makes supporting and removing pipe easy. Compatible with 1/2 in. Durable plastic construction to create the best piping support. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size.

More information about SUNGATOR #ad


Similar products



Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack

#ad
Watts P-960 #ad - Astm f1807 nsf/ansi 61 Nsf 372. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Compatible with stainless steel clamp & Copper Crimp ring systems. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications.

Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal. For supporting supply and return piping. Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project.

Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack #ad - Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing.

Resistant to corrosion due to dzr brass. Compatible with pex tubing. Use: use with sharkbite peX pipe tubing, PEX Crimp Tool and barb fittings.

More information about Watts P-960 #ad


Similar products



ISPINNER 50pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-50pcs

#ad
XM #ad - For supporting supply and return piping. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Certified lead-free. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Durable plastic construction to create the best piping support. Attention▲▲▲▲▲▲please use correct pex cinch clamp crimping tool. We will not be responsible for breaks due to incorrect and rough use. Attention▲▲▲▲▲▲【features】● 1/2-inch stainless steel pex cinch clamps with plastic box packing - 50pcs● 1/2 PEX clamps fit for 15.

ISPINNER 50pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes 1/2 inch-50pcs #ad - 0-17. 5mm pipe. Easy to use for contractors and homeowners. Compatible with stainless steel clamp & Copper Crimp ring systems. J-hook design makes supporting and removing pipe easy. Quantity - 50pcs with plastic box packing.

More information about XM #ad


Similar products



Cambridge Pex Cinch Rings 1/2 Inch, Open Diameter 17.5 mm, 100 Pcs, 304 Stainless Steel

#ad
Cambridge Resources PEX12 #ad - Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge. Durable plastic construction to create the best piping support. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size.

Premium quality nsf pw rated pex cinch ring clamps recommended for all forms of flexible and inflexible thin walled hoses. Certified lead-free. Easy to use for contractors and homeowners. Not recommended for CPVC. Astm f1807 nsf/ansi 61 Nsf 372. Pack of 50 Special features: perfect for connecting PEX to crimp type fittings in hard to reach spaces.

Cambridge Pex Cinch Rings 1/2 Inch, Open Diameter 17.5 mm, 100 Pcs, 304 Stainless Steel #ad - Features - interlocking ring that forms a complete 360-Degree watertight seal. Comes with 100 J-hooks per bag. Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets. Resistant to corrosion due to dzr brass.

J-hook design makes supporting and removing pipe easy. Compatible with pex tubing.

More information about Cambridge Resources PEX12 #ad


Similar products



100' Blue 100 Feet Red Flexible Tubing - 200 Feet of Water Polyethylene Tube Pipes - 1/2-Inch Pex Tubing Combo - PEX-B 1/2" 100-Feet Hot & Cold - Non-Barrier Flexible Flow Coil Pipe

#ad
CMI Inc. 1/2-Inch Pex Tubing Combo 100' Blue 100 #ad - You get 100 feet of red and 100ft of blue pex tubing. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Special features: perfect for connecting PEX to crimp type fittings in hard to reach spaces. Compatible with pex tubing.

To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Comes with 100 J-hooks per bag. Compatible with stainless steel clamp & Copper Crimp ring systems. Premium quality nsf pw rated pex cinch ring clamps recommended for all forms of flexible and inflexible thin walled hoses.

100' Blue 100 Feet Red Flexible Tubing - 200 Feet of Water Polyethylene Tube Pipes - 1/2-Inch Pex Tubing Combo - PEX-B 1/2" 100-Feet Hot & Cold - Non-Barrier Flexible Flow Coil Pipe #ad - 304 stainless steel 1/2 Inch, 17. 5mm open diameter,. Produces copper push to connect fittings and PEX barbed couplings, tube talon nails, tees, clamps, rings, elbows, and more.1/2-inch j-hook pipe hanger for PEX tubing. Premium plumbing Equipment that is easy to install. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Compatible with 1/2 in. Durable plastic construction to create the best piping support.

More information about CMI Inc. 1/2-Inch Pex Tubing Combo 100' Blue 100 #ad


Similar products