Oatey 33400 1-1/2 Inch Gripper, Red

#ad
OATEY 33400 #ad - Oatey 33400 1-1/2 Inch Gripper, Red #ad - Wing nut allows for easy tightening and removal. The oatey 1-1/2 in. Oatey test plug, 1-1/2 in nominal, 110 deg F, red, mechanical, 5 psi back pressure, plastic, nsf listed. Plastic body will not rust or corrode. Seals inside pipe mechanically. Designed for use to seal piping or to hold pressure while testing your piping system.

Excellent for plugging open-ended 1-1/2 in. Pipes. Plastic mechanical test plug mechanically seals inside the designated pipe.

More information about OATEY 33400 #ad

Oatey 33402 Mechanical Test Plug, 3 In, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

#ad
Oatey 33402 #ad - Galvanized mechanical plugs have a wide usage range making them effective on most piping material. Plastic mechanical test plug helps seal piping or holds pressure while testing a piping system. The oatey 3 in. Oatey test plug, plastic, red, mechanical, 5 psi back pressure, 3 in nominal, 110 deg F, nsf listed.

Ideal to plug open-ended 3 in pipes. Use to seal piping or to hold pressure while testing a piping system. Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized. Plastic plug body has minimal rusting or corroding. The plug's wing nut helps make tightening and removing the plug easy. The plastic body has minimal to no rusting or corroding for a long-lasting use.

Oatey 33402 Mechanical Test Plug, 3 In, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red #ad - Plastic mechanical plugs are premium plugs designed to hold higher pressures.

More information about Oatey 33402 #ad


Similar products



DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug | For Drains & Clean-outs | Fits 1-1/2 inch and 2 inch pipes | DWV Testing 10839

#ad
Danco 10839 #ad - Plastic mechanical plugs are premium plugs designed to hold higher pressures. The ergonomically designed handle turns and expands the patented rubber gasket to provide a guaranteed air and water tight seal. Expandable test plug fits 1-1/2 inch AND 2 inch pipes. Pipes. This innovative mechanical test plug is engineered to consolidate and improve the efficiency of testing and sealing pipes on existing homes and new constructions sites.

Plastic plug body has minimal rusting or corroding. Easy to install with no tools required, just simply hand tighten. Use to seal piping or to hold pressure while testing a piping system. Mechanical test plug for drains and cleanouts. Fits pipes with threads and pipes without threads. Unlike anything else on the market today, the PlugAll is engineered to fit both threaded and unthreaded pipes as well as 1-1/2 in.

DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug | For Drains & Clean-outs | Fits 1-1/2 inch and 2 inch pipes | DWV Testing 10839 #ad - Insert the plugAll into a pipe or pipe with threads and hand tighten. The plugall is a test and seal plug for drains and clean-outs. And 2 in. Ideal to plug open-ended 3 in pipes. Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal.

More information about Danco 10839 #ad


Similar products



2" Plastic Test Plug

#ad
HICO CNC3562 #ad - Galvanized mechanical plugs have a wide usage range making them effective on most piping material. Heavy plastic mechanical test plug will not rust or corrode. Used for end of pipe testing on steel, plastic or cast iron pipe. The cnc mechanical plastic test plug is intended for use to seal the end of pipe to hold pressure while testing the piping system.

Plastic plug body has minimal rusting or corroding. Zinc plated bolt and wing nut will not rust or corrode. Fits pipes with threads and pipes without threads. Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal. Use to seal piping or to hold pressure while testing a piping system.

2" Plastic Test Plug #ad - Easy to install with no tools required, just simply hand tighten. Heavy rubber gasket for positive seal. Ideal to plug open-ended 3 in pipes. Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized. Plastic mechanical plugs are premium plugs designed to hold higher pressures. It can also be used for temporary sealing of pipes and fittings until permanent repairs can be made.

More information about HICO CNC3562 #ad


Similar products



IPS 83592 2-Inch Mechanical Test Plug

#ad
IPS Corp 83592 #ad - Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized. Ideal to plug open-ended 3 in pipes. Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal. Use to seal piping or to hold pressure while testing a piping system. Plastic mechanical plugs are premium plugs designed to hold higher pressures.

Neoprene gasket. Easy to install with no tools required, just simply hand tighten. Heavy rubber gasket for positive seal. Will not Rust or Corrode. Used for end of pipe testing on steel, plastic or cast iron pipe. Heavy plastic mechanical test plug will not rust or corrode. Mechanical test plug for drains and cleanouts.

IPS 83592 2-Inch Mechanical Test Plug #ad - Galvanized mechanical plugs have a wide usage range making them effective on most piping material. Extra large zinc wing nut for ease of tightening and removing- no wrench required. 2-inch mechanical test plug with oversized pignut with wrench pad for easy removal, will not rust or corrode, and made with high impact abs material Plastic plug body has minimal rusting or corroding.

Made of high impact abs material. Zinc plated bolt and wing nut will not rust or corrode.

More information about IPS Corp 83592 #ad


Similar products



Cherne 270210 End of Pipe Gripper Mechanical Plug 1-1/2"

#ad
Cherne Industries 270210 #ad - Mechanical test plug for drains and cleanouts. Easy to install with no tools required, just simply hand tighten. 48 in, max Dia 1. Fits pipes with threads and pipes without threads. Mechanical components. Use to seal piping or to hold pressure while testing a piping system. Oversized pignut with wrench pad for easy removal.

Cherne 270210 End of Pipe Gripper Mechanical Plug 1-1/2" #ad - Zinc plated bolt and wing nut will not rust or corrode. Made of high impact abs material. Expandable test plug fits 1-1/2 inch AND 2 inch pipes. Extra large zinc wing nut for ease of tightening and removing- no wrench required. Imported From China. Heavy plastic mechanical test plug will not rust or corrode. 65 in, max back pressure 40 ft of head, material of construction rubber and abs plastic, Max Back Air Pressure 17 PSI, For Use In Sealing At The End Of the Pipe Plastic plug body has minimal rusting or corroding.

Will not Rust or Corrode. Neoprene gasket. Commercial Brand: Cherne Industries. Heavy rubber gasket for positive seal. Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.

More information about Cherne Industries 270210 #ad


Similar products



B and K 154-008 Test Plug, 2"

#ad
Jensen Distributing - Lawn & Garden 154-008 #ad - Plastic mechanical plugs are premium plugs designed to hold higher pressures. Mechanical components. Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal. Imported From China. Heavy plastic mechanical test plug will not rust or corrode. Easy to install with no tools required, just simply hand tighten.

This item is mueller Industries 2" Test Plug. Mechanical test plug for drains and cleanouts. Expandable test plug fits 1-1/2 inch AND 2 inch pipes. Extra large zinc wing nut for ease of tightening and removing- no wrench required. Galvanized mechanical plugs have a wide usage range making them effective on most piping material.

B and K 154-008 Test Plug, 2" #ad - . Use to seal piping or to hold pressure while testing a piping system. Brand name: B And K. Plastic plug body has minimal rusting or corroding. Fits pipes with threads and pipes without threads. Used for end of pipe testing on steel, plastic or cast iron pipe. Neoprene gasket.

More information about Jensen Distributing - Lawn & Garden 154-008 #ad


Similar products



Rubber Plug for 1-1/2 Inch Fitting and 1-1/2 Inch Pipe

#ad
Technical Products #ad - Use to seal piping or to hold pressure while testing a piping system. Great all around plug to assist with home plumbing needs, swimming pool winterizing, leak stopping, etc. The rubber expansion plugs are non-corrosive construction made of heavy-duty nylon, stainless steel, and high quality rubber. Heavy rubber gasket for positive seal.

Extra large zinc wing nut for ease of tightening and removing- no wrench required. Used for rough plumbing, Pipe And Conduit Accessories. The wing nut turns easier and provides 50% greater tightness than conventional plugs. Plastic mechanical plugs are premium plugs designed to hold higher pressures. Will not Rust or Corrode.

Rubber Plug for 1-1/2 Inch Fitting and 1-1/2 Inch Pipe #ad - This item is mueller Industries 2" Test Plug. Expandable test plug fits 1-1/2 inch AND 2 inch pipes. Used for end of pipe testing on steel, plastic or cast iron pipe. Heavy plastic mechanical test plug will not rust or corrode. Easy to install with no tools required, just simply hand tighten. Galvanized mechanical plugs have a wide usage range making them effective on most piping material.

More information about Technical Products #ad


Similar products



Cherne Industries, 269883, Pipe Plug, Mechanical, 1.25 In

#ad
Cherne 269883 #ad - Extra large zinc wing nut for ease of tightening and removing- no wrench required. Will not Rust or Corrode. Heavy plastic mechanical test plug will not rust or corrode. Mechanical components. Heavy rubber gasket for positive seal. Works in all types of pipe. Wing nut on 3/8" - 1-1/4" sizes. Hex nut on 1. 5" through 5" sizes.

Works well for plugging water line stub-outs. Size 1-1/4 in. 25 in, min Dia 1. Pipe plug, mechanical, Nominal Size 1. 24 in, max Dia 1. Used for rough plumbing, Pipe And Conduit Accessories. Easy to install with no tools required, just simply hand tighten. Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal.

Cherne Industries, 269883, Pipe Plug, Mechanical, 1.25 In #ad - Commercial Brand: Cherne Industries. Fits pipes with threads and pipes without threads. Use to seal piping or to hold pressure while testing a piping system. Mechanical components. 22 d in, material of construction rubber, for Use In Plugging And Testing Water Lines And Stub Outs Plastic plug body has minimal rusting or corroding.

More information about Cherne 269883 #ad


Similar products



Oatey 270245 End of Pipe Gripper Mechanical Plug 4", 4"

#ad
Oatey 270245 #ad - Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized. Ideal to plug open-ended 3 in pipes. Mechanical components. Imported From China. Will not Rust or Corrode. Plastic mechanical plugs are premium plugs designed to hold higher pressures. Galvanized mechanical plugs have a wide usage range making them effective on most piping material.

Oatey 270245 End of Pipe Gripper Mechanical Plug 4", 4" #ad - Mechanical test plug for drains and cleanouts. Heavy plastic mechanical test plug will not rust or corrode. The product Is Manufactured In Taiwan. Country of Origin: China. Used for rough plumbing, Pipe And Conduit Accessories. Works in all types of pipe. Wing nut on 3/8" - 1-1/4" sizes. Hex nut on 1. 5" through 5" sizes.

Works well for plugging water line stub-outs. Size 1-1/4 in. Zinc plated bolt and wing nut will not rust or corrode. Brand name: B And K.

More information about Oatey 270245 #ad


Similar products



No. 7 To 10 Universal Rubber Winter Plug for a Variety of 1-1/2 Inch Pipe

#ad
Technical Products #ad - Stainless steel bolts and washers. Use to seal piping or to hold pressure while testing a piping system. End of pipe gripper Mechanical Plug 4". Ergonomically designed handle turns and expands patented rubber gasket to provide air and water tight seal. Commercial Brand: Cherne Industries. The product Is Manufactured In Taiwan.

Will not Rust or Corrode. Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized. Simply screw plugs into all return and drain inlets after blowing out lines. The extra long taper allows for a more secure fit. Ideal to plug open-ended 3 in pipes. Extra large zinc wing nut for ease of tightening and removing- no wrench required.

No. 7 To 10 Universal Rubber Winter Plug for a Variety of 1-1/2 Inch Pipe #ad - Brand name: Oatey. Mechanical components. Heavy rubber gasket for positive seal. Expandable test plug fits 1-1/2 inch AND 2 inch pipes. Plastic mechanical plugs are premium plugs designed to hold higher pressures. Fits pipes with threads and pipes without threads. Model number: 270245.

More information about Technical Products #ad


Similar products