NDS 6P06 Fitting, 6-Inch, White

#ad
NDS, Inc. 6P06 #ad - Hub solvent-welded connection. Sewer & drain s & d pipe, in the installation of non-pressurized drainage & sewer piping systems. Pvc construction is durable, lightweight, economical & resistant to corrosion & chemicals. Made to aSTM Specifications. Use to close off 6 in. Sewer and drain s and D pipe, in the installation of non-pressurized drainage and sewer piping systems.

Maximum working pressure of 5 PSI. Pvc construction is durable, lightweight, economical and resistant to corrosion and chemicals. Maximum working pressure of 5 psi. Made to aSTM Specifications. Use to close off 6 in. Hub solvent-welded connection.

More information about NDS, Inc. 6P06 #ad

EVERCONNECT 1760 Flexible Pvc Pipe Cap with Stainless steel Clamps, 6", Black

#ad
Everflow 1760 #ad - Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. Conforms to csa b602, certified and UPC approved, rated for underground use. Everflow flexible couplings are leak-proof, rot-proof and seal against infiltration and exfiltration, giving you confidence in your pipe connections.

Everflow everconnect caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. California proposition 65 warning: this product can expose you to chemicals including Phthalates content which are known to the State of California to cause cancer, and birth defects or other reproductive harm.

. Made of tough elastomeric polyvinyl chloride PVC, the flexible couplings are strong, resilient and unaffected by soil conditions. Everflow pipe couplings and adapters are used for all types of in-house and sewer connections: drain, cut- ins, repairs, house-to-main, conductor, vent piping, waste, roof drains and increasers-reducers.

EVERCONNECT 1760 Flexible Pvc Pipe Cap with Stainless steel Clamps, 6", Black #ad - They are also resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases due to the inert nature and physical properties of the PVC material. Everflow flexible couplings have found wide acceptance among sewer and Plumbing contractors and municipalities because of their quality and ease of installation.

Made of flexible pvc, their durability causes them to be suitable for above-ground or underground use. Compatible with cast iron, Copper, plastic, or schedule 40 steel piping. May be used for non-pressure drain, waste, and vent dwv piping systems and sewer systems indoors and outdoors.

More information about Everflow 1760 #ad


Similar products



Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 6" Socket

#ad
Spears Manufacturing #ad - Conforms to csa b602, certified and UPC approved, rated for underground use. Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. Compatible with cast iron, plastic, Copper, or schedule 40 steel piping. May be used for non-pressure drain, waste, and vent dwv piping systems and sewer systems indoors and outdoors.

. Fittings 447-060 Pvccap6 6" pvc slip cap pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.

More information about Spears Manufacturing #ad


Similar products



Canplas 414216BC PVC Sew 6 Coupling

#ad
Canplas 414216BC #ad - Installed in a pvc white sewer piping system to join two 2 pieces of 6" PVC White Sewer Pipe or provide a Hub connection at the end of the pipe. Pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Fittings 447-060 Compatible with cast iron, Copper, plastic, or schedule 40 steel piping.

May be used for non-pressure drain, waste, and vent dwv piping systems and sewer systems indoors and outdoors. High chemical resistance to nearly all acids, alcohols, alkalis, halogens and other corrosive media. Use approved pvc primer and solvent cement to make PVC Joints. Injection molded in Non-Toxic durable White Polyvinyl Chloride PVC.

Canplas 414216BC PVC Sew 6 Coupling #ad - Flame retardant, will not support combustion in the absence of an ignition source. Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. Maximum service temperature Rated at 140F +60C. Conforms to csa b602, certified and UPC approved, rated for underground use.

More information about Canplas 414216BC #ad


Similar products



Charlotte Pipe 05980H 4" DWV Cap PVC DWV Drain, Waste and Vent Schedule 40 Single Unit, White

#ad
Charlotte Pipe 05980H #ad - They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. Easy to install: pvc is lightweight, They require no special tools for cutting, flanging, threading, and can be installed with solvent cementing, and roll-grooved joining.

Made in the usa: for over a century, charlotte pipe has been manufacturing pipe and fittings, employing more than 1, 400 loyal, hard-working Americans. They require no special tools for cutting, flanging, and can be installed with solvent cementing, threading, and roll-grooved joining. Continuous investment in the latest casting technology has made our foundry one of the most modern in the world.

Pvc is lightweight and easy to install. Charlotte pipe meets or exceeds all federal, state and local environmental regulations and standards. Fittings 447-060 Flame retardant, will not support combustion in the absence of an ignition source. Since 1988, we have spent approximately $30 million on environmental improvement projects.

Charlotte Pipe 05980H 4" DWV Cap PVC DWV Drain, Waste and Vent Schedule 40 Single Unit, White #ad - We recently received the "blue thumb" award from our local water authority for our water conservation efforts puters and technicians constantly monitor production with online and in-lab QC tests. Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings.

More information about Charlotte Pipe 05980H #ad


Similar products



Genova Products 70154 PVC DWV Cap, 4"

#ad
Jensen (Home Improvement) 70154 #ad - Pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media. Use approved pvc primer and solvent cement to make PVC Joints.

This product is manufactured in china. Fittings 447-060 Conforms to csa b602, certified and UPC approved, rated for underground use. Drain, waste, vent: poly vinyl chloride pvc white pipe and fittings are used in sanitary drain, and vent DWV, waste, sewer and storm drainage applications. Not for pressure use: they are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140 ° F.

Genova Products 70154 PVC DWV Cap, 4" #ad - Charlotte pipe pvc: it is non-toxic and meets the most stringent standards in the industry. Highly durable. Nsf standard 14. Flame retardant, will not support combustion in the absence of an ignition source. Injection molded in Non-Toxic durable White Polyvinyl Chloride PVC. Maximum service temperature Rated at 140F +60C.

Astm d 1784 & astm d 2665 & astm d 3409.

More information about Jensen (Home Improvement) 70154 #ad


Similar products



Oatey 270261 Cherne Gripper 6-inch End of Pipe Plug

#ad
Oatey 270261 #ad - High chemical resistance to nearly all acids, alcohols, alkalis, halogens and other corrosive media. Use approved pvc primer and solvent cement to make PVC Joints. Highly durable. Easy to install with extra-large wing nut. Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.

All of our products are proudly made in the USA. Manufactured in china. Country Of Origin: China. Fittings 447-060 Injection molded in Non-Toxic durable White Polyvinyl Chloride PVC. Brand Name: Oatey. Product dimensions: 6. 0 x 6. 0 x 2. 0". Easy to use. Inside of pipe seals inside pipe as far as needed Pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.

Oatey 270261 Cherne Gripper 6-inch End of Pipe Plug #ad - Flame retardant, will not support combustion in the absence of an ignition source. Ideal for plumbing system tests. Easy to install: pvc is lightweight, and can be installed with solvent cementing, flanging, threading, They require no special tools for cutting, and roll-grooved joining.

More information about Oatey 270261 #ad


Similar products



PVC Dwv Cap 4"

#ad
Genova 40154 #ad - The product is manufactured in United States. Maximum service temperature Rated at 140F +60C. Highly durable. Product dimensions: 6. 0 x 6. 0 x 2. 0". Easy to install: pvc is lightweight, threading, and can be installed with solvent cementing, They require no special tools for cutting, flanging, and roll-grooved joining.

Made in the usa: for over a century, 400 loyal, employing more than 1, charlotte pipe has been manufacturing pipe and fittings, hard-working Americans. Used for rough plumbing, Pipe And Conduit Accessories. All of our products are proudly made in the USA. Manufactured in china. Fittings 447-060 Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.

PVC Dwv Cap 4" #ad - Model number: 40154. High chemical resistance to nearly all acids, alcohols, alkalis, halogens and other corrosive media. Use approved pvc primer and solvent cement to make PVC Joints. The product is manufactured in United States. Compatible with cast iron, plastic, Copper, or schedule 40 steel piping. May be used for non-pressure drain, waste, and vent dwv piping systems and sewer systems indoors and outdoors.

More information about Genova 40154 #ad


Similar products



GENOVA PRODUCTS 41060 Solvent Weld Sewer and Drain Pipe Wye, 6 Inch, White

#ad
Standard Plumbing Supply 41060 #ad - Easy to use. This product is highly durable. Nsf standard 14. This item is genova 40154 4" S&D Cap. Easy to install: pvc is lightweight, They require no special tools for cutting, threading, and can be installed with solvent cementing, flanging, and roll-grooved joining. Made in the usa: for over a century, employing more than 1, 400 loyal, charlotte pipe has been manufacturing pipe and fittings, hard-working Americans.

Brand Name: Oatey. All of our products are proudly made in the USA. Manufactured in china. Drain, waste, vent: poly vinyl chloride pvc white pipe and fittings are used in sanitary drain, and vent DWV, waste, sewer and storm drainage applications. Not for pressure use: they are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140 ° F.

GENOVA PRODUCTS 41060 Solvent Weld Sewer and Drain Pipe Wye, 6 Inch, White #ad - Charlotte pipe pvc: it is non-toxic and meets the most stringent standards in the industry. Pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Conforms to csa b602, certified and UPC approved, rated for underground use. 6 inch wye sewer & drain. Injection molded in Non-Toxic durable White Polyvinyl Chloride PVC.

The product is manufactured in United States.

More information about Standard Plumbing Supply 41060 #ad


Similar products



Cherne 271578 Test Plug, 6""

#ad
Cherne Industries 271578 #ad - The product is manufactured in United States. Fittings 447-060 Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. Pipe plug, nominal size 6 In, Mechanical, Min Dia 5. Conforms to csa b602, certified and UPC approved, rated for underground use. 62 in, max Dia 6. Drain, vent: poly vinyl chloride pvc white pipe and fittings are used in sanitary drain, waste, WASTE, and vent DWV, sewer and storm drainage applications.

Not for pressure use: they are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140 ° F. Charlotte pipe pvc: it is non-toxic and meets the most stringent standards in the industry. Compatible with cast iron, Copper, plastic, or schedule 40 steel piping.

Cherne 271578 Test Plug, 6"" #ad - May be used for non-pressure drain, waste, and vent dwv piping systems and sewer systems indoors and outdoors. Commercial Brand: Cherne Industries. Manufactured in china. Used for rough plumbing, Pipe And Conduit Accessories. Maximum service temperature Rated at 140F +60C. Easy to use.

More information about Cherne Industries 271578 #ad


Similar products



Oatey 39103 Knock-Out Dwv Test Cap, 4 In, 17 Psi, Abs, 4"", White

#ad
OATEY 39103 #ad - Brand name: Oatey. Commercial Brand: Cherne Industries. Easy to use. Pvc caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Wing nut Mechanical Plug. Flexible connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,. Imported From Taiwan. Drain, waste, and vent dwv, vent: poly vinyl chloride pvc white pipe and fittings are used in sanitary drain, WASTE, sewer and storm drainage applications.

Not for pressure use: they are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140 ° F. Charlotte pipe pvc: it is non-toxic and meets the most stringent standards in the industry. Nsf standard 14. Used for rough plumbing, Pipe And Conduit Accessories.

Oatey 39103 Knock-Out Dwv Test Cap, 4 In, 17 Psi, Abs, 4"", White #ad - Highly durable. Easy to use. Color: White. After test the center is knocked out and thrown away. Fittings 447-060 Easy to install: pvc is lightweight, They require no special tools for cutting, flanging, and can be installed with solvent cementing, threading, and roll-grooved joining. Made in the usa: for over a century, charlotte pipe has been manufacturing pipe and fittings, 400 loyal, employing more than 1, hard-working Americans.

More information about OATEY 39103 #ad


Similar products