Mueller Industries 109-813 Tank Float Valve, 1/2 Inlet X Male Outlet, 1/2-Inch, Bronze

#ad
Mueller Industries 109-813 #ad - No-jam, single lever action. Carded. Machined flange for support against tank wall. No. R400-1/2: 12 gpm at 35 psi; 22gpm at 85 PSI. Free discharge flow capacity. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. No. R400-3/4: 21 gpm at 35 psi; 39. 9 gpm at 85 pSI. Stainless steel pivot bolt assembly.

B & k tank float valve, b & k, model: 109, 125 psi maximum, 20 tpi, 1/4 in rod, 1/2 in Inlet, Bronze Body, Male Inlet X Male Outlet Connection, Includes: Locknut and Washer. Replaceable seals. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms locknut included with male inlet valves.

Mueller Industries 109-813 Tank Float Valve, 1/2 Inlet X Male Outlet, 1/2-Inch, Bronze #ad - All bronze bodies. Serrated arms for quick and easy adjustment of water level all sizes. Model number: 109-813. High tensile manganese bronze long and short arms. Bronze finish.

More information about Mueller Industries 109-813 #ad

Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length

#ad
Kerick Valve SR06 #ad - The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. The company, founded in 1994, is headquartered in Jacksonville, FL. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever.

1/4"-20 male threads at each end for mounting, 6" long. It is made of 18-8 stainless steel for resistance to corrosion and has 1/4"-20 male threads on each end. This kerick sr06 stainless steel rod is 1/4" in diameter and 6" long. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied.

Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length #ad - As part of a float valve installation, it is suitable for use in a variety of applications, livestock water tanks, such as fountains, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, cooling towers, such as fountains, livestock water tanks, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. When the angle of the valve lever changes sufficiently, the valve opens or closes.

More information about Kerick Valve SR06 #ad


Similar products



Kerick Valve PF06 Polyethylene Sphere Float Ball, 6" Diameter, 6" Length, 1/4" Female Thread

#ad
Kerick PF06 #ad - It is intended for use with 3/8" to 1" inlet float valves and 1/4"-20 threaded rods sold separately. Molded in one piece to resist leakage. Polyethylene for chemical resistance. When the angle of the valve lever changes sufficiently, the valve opens or closes. As part of a float valve installation, such as fountains, it is suitable for use in a variety of applications, livestock water tanks, and chemical manufacturing plants.

Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. This kerick pf06 oval float ball is 6" in diameter. 18-8 stainless steel for corrosion resistance. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied.

Kerick Valve PF06 Polyethylene Sphere Float Ball, 6" Diameter, 6" Length, 1/4" Female Thread #ad - 1/4"-20 female threads for mounting. The company, founded in 1994, is headquartered in Jacksonville, FL. It is made of polyethylene for resistance to corrosion and to deterioration from sunlight, is molded in one piece to resist leakage, and has 1/4"-20 female threads. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever.

For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature.

More information about Kerick PF06 #ad


Similar products



Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length

#ad
Kerick Valve SR10 #ad - 1/4"-20 female threads for mounting. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, livestock water tanks, cooling towers, such as fountains, and chemical manufacturing plants. Kerick valve manufactures fluid level control valves for industrial applications.

The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. It is made of 18-8 stainless steel for resistance to corrosion and has 1/4"-20 male threads on each end. It is intended for use with 3/8" and 1/2" inlet float valves and 4 x 5" or 2 x 2 x 4" float balls sold separately.

Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length #ad - 18-8 stainless steel for corrosion resistance. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. As part of a float valve installation, such as fountains, it is suitable for use in a variety of applications, livestock water tanks, and chemical manufacturing plants.

Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. Molded in one piece to resist leakage. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Polyethylene for chemical resistance.

More information about Kerick Valve SR10 #ad


Similar products



Keeeny PP9906-1 Plastic Tank Float Ball 4 inch X 5 inch, Black

#ad
Keeney Manufacturing PP9906-1 #ad - 1/4"-20 female threads for mounting. Molded in one piece to resist leakage. 18-8 stainless steel for corrosion resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. For use with 3/8" to 1" inlet float valves and 1/4"-20 threaded rods sold separately. No tools necessary.

Easy to install. Universal design fits most float rods. Tank float ball. 18-8 stainless steel for corrosion resistance. Keeeny pp9906-1 plastic tank float ball 4 inch x 5 inch, black For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Dependable high-quality plastic construction.

Keeeny PP9906-1 Plastic Tank Float Ball 4 inch X 5 inch, Black #ad - 1/4"-20 male threads at each end for mounting, 6" long. Polyethylene for chemical resistance. 1/4"-20 male threads at each end for mounting, 10" long.

More information about Keeney Manufacturing PP9906-1 #ad


Similar products



Mueller Industries 109-814 Float Valves, 0.75 Inch

#ad
Mueller Industries 109-814 #ad - 18-8 stainless steel for corrosion resistance. High tensile serrated arms. Dual inlet thread for connecting pipe and locknut. Tank float ball. For use with 3/8" to 1" inlet float valves and 1/4"-20 threaded rods sold separately. 1/4"-20 male threads at each end for mounting, 6" long. Molded in one piece to resist leakage.

Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. Machined flange for support against tank wall. No tools necessary. Easy to install. Bronze finish. 18-8 stainless steel for corrosion resistance. 1/4"-20 female threads for mounting. 1/4"-20 male threads at each end for mounting, 10" long.

Mueller Industries 109-814 Float Valves, 0.75 Inch #ad - For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Polyethylene for chemical resistance. Carded. Universal design fits most float rods. B and k industries 109-814 valve float male 3/4 for use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

More information about Mueller Industries 109-814 #ad


Similar products



Kerick Valve SR03 Stainless Steel Rod for Float Valve, 1/4" Diameter, 3" Length

#ad
Kerick Valve SR03 #ad - It is intended for use with 3/8" and 1/2" inlet float valves and 4 x 5" or 2 x 2 x 4" float balls sold separately. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. This kerick sr03 stainless steel rod is 1/4" in diameter and 3" long. Molded in one piece to resist leakage.

18-8 stainless steel for corrosion resistance. 3/4-inch. No tools necessary. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Dual inlet thread for connecting pipe and locknut. When the angle of the valve lever changes sufficiently, the valve opens or closes. Machined flange for support against tank wall.

Kerick Valve SR03 Stainless Steel Rod for Float Valve, 1/4" Diameter, 3" Length #ad - Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. 1/4"-20 male threads at each end for mounting, 10" long. Bronze finish. Universal design fits most float rods. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever.

1/4"-20 male threads at each end for mounting, 3" long.

More information about Kerick Valve SR03 #ad


Similar products



Kerick Valve PF224-NT Polyethylene Rectangle Float Ball, 2" Width, 2" Height, 4" Length, 1/4" Female Thread

#ad
Kerick Valve PF224-NT #ad - Universal design fits most float rods. 18-8 stainless steel for corrosion resistance. Polyethylene for chemical resistance. Dual inlet thread for connecting pipe and locknut. 1/4"-20 female threads for mounting. Dependable high-quality plastic construction. 18-8 stainless steel for corrosion resistance. Machined flange for support against tank wall.

Easy to install. As part of a float valve installation, such as fountains, livestock water tanks, it is suitable for use in a variety of applications, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. High tensile serrated arms.

Kerick Valve PF224-NT Polyethylene Rectangle Float Ball, 2" Width, 2" Height, 4" Length, 1/4" Female Thread #ad - Polyethylene for chemical resistance. Molded in one piece to resist leakage. Carded. When the angle of the valve lever changes sufficiently, the valve opens or closes. Bronze finish. For use with 3/8" to 3/4" inlet float valves and 1/4"-20 threaded rods sold separately. It is intended for use with 3/8" to 3/4" inlet float valves and 1/4"-20 threaded rods sold separately.

More information about Kerick Valve PF224-NT #ad


Similar products



Kerick Valve PF444-BK Polyethylene Square Float Ball, 4" Width, 4" Height, 4" Length, 1/4" Female Thread

#ad
Kerick Valve PF444-BK #ad - 18-8 stainless steel for corrosion resistance. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Carded. Polyethylene for chemical resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 1/4"-20 female threads for mounting. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature.

Kerick Valve PF444-BK Polyethylene Square Float Ball, 4" Width, 4" Height, 4" Length, 1/4" Female Thread #ad - Polyethylene for chemical resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, cooling towers, livestock water tanks, such as fountains, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. 1/4"-20 male threads at each end for mounting, 10" long. Bronze finish. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever.

More information about Kerick Valve PF444-BK #ad


Similar products



DN15 G1/2 Brass Male Thread Water Sensor Stainless Steel Float Ball Value 0.1-0.8MPa Used in Pipelines

#ad
Walfront #ad - 1/4"-20 male threads at each end for mounting, 3" long. High quality brass : the body is adopted with high-quality brass material, and treated by hot forging process, stable and durable. Tank float ball. 1/4"-20 female threads for mounting. Molded in one piece to resist leakage. Universal design fits most float rods.

18-8 stainless steel for corrosion resistance. Polyethylene for chemical resistance. Molded in one piece to resist leakage. No tools necessary. Polyethylene for chemical resistance. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Dependable high-quality plastic construction.

DN15 G1/2 Brass Male Thread Water Sensor Stainless Steel Float Ball Value 0.1-0.8MPa Used in Pipelines #ad - Easy to install. For use with 3/8" to 3/4" inlet float valves and 1/4"-20 threaded rods sold separately. Application: this brass male Thread Float Ball Value is Widely used in magnetic level switch and liquid level measurements. Good performance: this brass Male Thread Float Ball Value has the good performance of corrosion resistance and anti-deformation.

Purpose: ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium. Carded.

More information about Walfront #ad


Similar products



Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1/2" NPT Male Inlet x 1/2" NPT Male Outlet, 22 gpm at 85 psi Pressure

#ad
Control Devices #ad - Application: this brass male Thread Float Ball Value is Widely used in magnetic level switch and liquid level measurements. Good performance: this brass Male Thread Float Ball Value has the good performance of corrosion resistance and anti-deformation. Purpose: ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium.

1/4"-20 male threads at each end for mounting, 10" long. 1/4"-20 female threads for mounting. Machined flange for support against tank wall. Red brass body. Universal design fits most float rods. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 18-8 stainless steel for corrosion resistance.

Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1/2" NPT Male Inlet x 1/2" NPT Male Outlet, 22 gpm at 85 psi Pressure #ad - Nsf listed. Free discharge flow capacity: 12 gpm at 35 psi, 18 gpm at 65 psi and 22 gpm at 85 psi. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Bronze finish. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Molded in one piece to resist leakage.

More information about Control Devices #ad


Similar products