EDGE INDUSTRIAL Brass Pipe Adapter 1/2″ FNPT x 3/8″ MNPT Fuel/AIR/Water/Oil/Gas WOG

#ad
EDGE INDUSTRIAL #ad - Backed by edGE Industrial full manufacturers warranty. Used for a variety of applications, water, oil gas, refrigeration, fuels, not limited to grease, and hydraulic systems. Please note: npt thread size is NOT determined by its outside thread diameter in inches. Working pressure of 1200 PSI. Not deemed lead free.

EDGE INDUSTRIAL Brass Pipe Adapter 1/2" FNPT x 3/8" MNPT Fuel/AIR/Water/Oil/Gas WOG #ad - Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 1/2" female npt x 3/8" male NPT Adapter. 1/2" female npt x 3/8" male NPT Brass Pipe Adapter. Not for use with potable water. Not for potable water. Not deemed lead free. Meets the standards of ASA, ASME and SAE. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C.

Please note, 1/2" npt measures 0840", 3/8" npt measures 0675" outside thread diameter in linear inches. Temperature range of -65°f to 250°F -53°C to 121°C.

More information about EDGE INDUSTRIAL #ad

Milton S-766 3/8" FNPT Female V-Style High-Flow Coupler

#ad
Milton S-766 #ad - However, v-style plugs are recommended to retain maximum flow. Milton v-style couplers will also accept M-Style and A-Style plugs. Buna-N seals. Milton is your number 1 source for Quality Air Accessories. Milton covers automotive, agriculture, industrial, hardware, heavy-duty fleet and MRO markets.300 psi max pressure.

. Perfect for high volume, low pressure applications. Simply push plug into coupler to engage; Pull the sleeve release back to remove. V-style is recommended to retain maximum flow. V-style: milton v-style, colorFit V-style, + competitor V couplers/plugs are all compatible! Basic flow size. 74 scfm. Ideal: for high Volume, Low Pressure pneumatic applications.

Milton S-766 3/8" FNPT Female V-Style High-Flow Coupler #ad - Sleeve release: push to connect to plug, PULL sleeve back to remove. 300 psi max inlet Pressure. Since 1943 milton has been producing Quality Air Accessories. Milton s-766 3/8" fnpt female v-style high-flow coupler These high flow 3/8"  female NPT V-Style couplers have a push-type sleeve release. 250 degree F Max Temp.

More information about Milton S-766 #ad


Similar products



EDGE INDUSTRIAL BRASS PIPE ADAPTER 1/2" FNPT x 1/4" MNPT FUEL/AIR/WATER/OIL/GAS WOG

#ad
EDGE INDUSTRIAL #ad - Milton covers automotive, hardware, industrial, agriculture, heavy-duty fleet and MRO markets.1/2" female npt x 1/4" male NPT Adapter. Ideal: for high Volume, Low Pressure pneumatic applications. Sleeve release: push to connect to plug, PULL sleeve back to remove. Please note: npt thread size is NOT determined by its outside thread diameter in inches.

Not for potable water. Buna-N seals. Milton is your number 1 source for Quality Air Accessories. Backed by edGE Industrial full manufacturers warranty. Temperature range of -65°f to 250°F -53°C to 121°C. 74 scfm. Not for use with potable water. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C.

EDGE INDUSTRIAL BRASS PIPE ADAPTER 1/2" FNPT x 1/4" MNPT FUEL/AIR/WATER/OIL/GAS WOG #ad - 300 psi max inlet Pressure. Used for a variety of applications, not limited to grease, oil gas, fuels, water, refrigeration, and hydraulic systems. Please note, 1/2" npt measures 0840", 1/4" npt measures 0540" outside thread diameter in linear inches. Since 1943 milton has been producing Quality Air Accessories.

More information about EDGE INDUSTRIAL #ad


Similar products



Anderson Metals Brass Pipe Fitting, Adapter, 3/8" Male Pipe x 1/2" Female Pipe

#ad
Anderson Metals 56120-0806 #ad - 250 degree F Max Temp. Compatible: will also accept both M-Style and A-Style plugs. 74 scfm. Not for potable water. High flow: 3/8" female npt. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. V-style is recommended to retain maximum flow. V-style: milton v-style, colorFit V-style, + competitor V couplers/plugs are all compatible!

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Please note, 1/2" npt measures 0840", 1/4" npt measures 0540" outside thread diameter in linear inches.

Anderson Metals Brass Pipe Fitting, Adapter, 3/8" Male Pipe x 1/2" Female Pipe #ad - 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. The operating temperatures for this fitting range from -53 to 121 degrees C -65 to 250 degrees F. Pipe size and actual Thread OD are different. Not deemed lead free.

More information about Anderson Metals 56120-0806 #ad


Similar products



EDGE INDUSTRIAL Brass REDUCING Coupling 1/2" X 3/8" Female NPT FNPT Fuel/AIR/Water/Oil/Gas WOG

#ad
EDGE INDUSTRIAL #ad - Milton covers automotive, agriculture, industrial, hardware, heavy-duty fleet and MRO markets.1/2" female npt x 1/4" male NPT Adapter. The thread od is larger than the Pipe Size. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. 1/2" x 3/8" female npt Brass Reducing Coupling.

Male national pipe taper npt threads on one end and female npt threads on the other for connecting pipes with different ends. V-style is recommended to retain maximum flow. V-style: milton v-style, colorFit V-style, + competitor V couplers/plugs are all compatible! Please note, 1/2" npt measures 0840", 1/4" npt measures 0

EDGE INDUSTRIAL Brass REDUCING Coupling 1/2" X 3/8" Female NPT FNPT Fuel/AIR/Water/Oil/Gas WOG #ad - 540" outside thread diameter in linear inches. Since 1943 milton has been producing Quality Air Accessories. Adapter for connecting pipes or fittings of different types. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

More information about EDGE INDUSTRIAL #ad


Similar products



TEKTON 46362 1/2-Inch I.D. by 3-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch NPT Male Ends

#ad
Michigan Industrial Tools 46362 #ad - Please note, 1/2" npt measures 0840", 3/8" npt measures 0675" outside thread diameter in linear inches. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Rubber lead-in air hose is ideal for connecting supply lines, compressors, hose reels, and other system components.

Not deemed lead free. I. D. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Male national pipe taper npt threads on one end and female npt threads on the other for connecting pipes with different ends. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C.

TEKTON 46362 1/2-Inch I.D. by 3-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch NPT Male Ends #ad - And its territories. 1/2" x 3/8" female npt Brass Reducing Coupling. Ideal: for high Volume, Low Pressure pneumatic applications. Sleeve release: push to connect to plug, PULL sleeve back to remove. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance.

Npt male ends, the TEKTON 3 ft. Please wash your hands after use.

More information about Michigan Industrial Tools 46362 #ad


Similar products



EDGE INDUSTRIAL Brass Pipe Adapter 3/8" FNPT x 1/4" MNPT Fuel/AIR/Water/Oil/Gas WOG

#ad
EDGE INDUSTRIAL #ad - 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Not for potable water. Buna-N seals. Milton is your number 1 source for Quality Air Accessories. Flexible rubber stays soft and easy to work with even at -40 degrees F.

Working pressure of 1200 PSI. Not for potable water. Backed by edGE Industrial full manufacturers warranty. V-style is recommended to retain maximum flow. V-style: milton v-style, colorFit V-style, + competitor V couplers/plugs are all compatible! Made in the USA. Pipe size and actual Thread OD are different. Milton covers automotive, agriculture, industrial, hardware, heavy-duty fleet and MRO markets.

EDGE INDUSTRIAL Brass Pipe Adapter 3/8" FNPT x 1/4" MNPT Fuel/AIR/Water/Oil/Gas WOG #ad - 1/2" female npt x 1/4" male NPT Adapter. 250 degree F Max Temp. Compatible: will also accept both M-Style and A-Style plugs. Not deemed lead free. Not deemed lead free.

More information about EDGE INDUSTRIAL #ad


Similar products



NIGO Brass Pipe Fitting, Hex Bushing 1 Pack, 1/2" NPT Male x 3/8" NPT Female

#ad
Nigo Industrial Co. #ad - Backed by edGE Industrial full manufacturers warranty. Male national pipe taper npt threads on one end and female npt threads on the other for connecting pipes with different ends. V-style is recommended to retain maximum flow. V-style: milton v-style, colorFit V-style, + competitor V couplers/plugs are all compatible!

And its territories. 1/2" x 3/8" female npt Brass Reducing Coupling. Adapter for connecting pipes or fittings of different types. Not for potable water. Please see npt thread - chart to determine the correct size required. Temperatures range from -65 to 250 F. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F.

NIGO Brass Pipe Fitting, Hex Bushing 1 Pack, 1/2" NPT Male x 3/8" NPT Female #ad - Milton covers automotive, agriculture, industrial, hardware, heavy-duty fleet and MRO markets.1/2" female npt x 1/4" male NPT Adapter. Pressure: 1000 psi wog  about Us Nigo Industrial Co,. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Buna-N seals. Milton is your number 1 source for Quality Air Accessories.

250 degree F Max Temp.

More information about Nigo Industrial Co. #ad


Similar products



Anderson Metals Brass Pipe Fitting, Adapter, 1/4" Male Pipe x 3/8" Female Pipe

#ad
Anderson Metals 56120-0604 #ad - 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. And its territories. 1/2" x 3/8" female npt Brass Reducing Coupling. Not for potable water. Backed by edGE Industrial full manufacturers warranty. Please see npt thread - chart to determine the correct size required. Pipe size and actual Thread OD are different.

Contains low-lead no more than 2. 5%; not for potable/drinking water use. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F.

Anderson Metals Brass Pipe Fitting, Adapter, 1/4" Male Pipe x 3/8" Female Pipe #ad - Constructed from extruded bar stock. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. And its territories. Max. Adapter for connecting pipes or fittings of different types. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

More information about Anderson Metals 56120-0604 #ad


Similar products



Milton S-767 3/8" MNPT Male V-Style High Flow Coupler

#ad
Milton S-767 #ad - And its territories. 1/2" x 3/8" female npt Brass Reducing Coupling. Basic flow size. Adapter for connecting pipes or fittings of different types. High flow: 3/8" female npt. Please note, 3/8 npt measures 0675", 1/4" npt measures 0540" outside thread diameter in linear inches. However, v-style plugs are recommended to retain maximum flow.

Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. 3/8" female npt x 1/4" male NPT Adapter. Not for potable water. 74 scfm. Backed by edGE Industrial full manufacturers warranty. Backed by edGE Industrial full manufacturers warranty. Not deemed lead free. Not deemed lead free. Milton v-style couplers will also accept M-Style and A-Style plugs.

Milton S-767 3/8" MNPT Male V-Style High Flow Coupler #ad - 1/4" basic flow size. Please note, 1/2" npt measures 0840", 1/4" npt measures 0540" outside thread diameter in linear inches.

More information about Milton S-767 #ad


Similar products



EDGE INDUSTRIAL Brass REDUCING HEX Bushing 1/2" Male NPT X 1/4" Female NPT Fuel / AIR/ Water / Oil/ Gas WOG Qty 01

#ad
EDGE INDUSTRIAL #ad - Please note: npt thread size is NOT determined by its outside thread diameter in inches. 3/8" female npt x 1/4" male NPT Adapter. 1200 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

EDGE INDUSTRIAL Brass REDUCING HEX Bushing 1/2" Male NPT X 1/4" Female NPT Fuel / AIR/ Water / Oil/ Gas WOG Qty 01 #ad - S. A. The thread od is larger than the Pipe Size. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not for use with potable water. Not deemed lead free. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Buna-N seals. Milton is your number 1 source for Quality Air Accessories.

Not deemed lead free. 250 degree F Max Temp. Compatible: will also accept both M-Style and A-Style plugs. 1/4" basic flow size. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

More information about EDGE INDUSTRIAL #ad


Similar products