Dormont 20-3132-48B Gas Dryer 1/2-Inch Diameter Connector, 48-Inch Length

#ad
Watts 20-3132-48B #ad - 48 gas dryer connector, fitted with 1 2 m. I. P. 3 8 i. D. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Stainless steel gas dryer connector. Tapped with 3 8 F. I. P polybaggedthis dormont gas connector is csa design certified domestically and internationally for indoor and outdoor use with natural, liquefied petroleum, manufactured, mixed, and lp-gas air mixtures durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility quality flared end fittings create a metal to metal seal to ensure integrity in critical applications manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

. 1/2-inch od by 48-Inch length gas connector. Ansi z21. 24 csa 6. 10 ansi Z21. 75 csa 6. 27 pressure rating up to 1 2 psi 1 2 O. D. Made in the USA. X 1 2 f.

More information about Watts 20-3132-48B #ad

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant

#ad
The Rectorseal Corporation GIDDS-441280 #ad - 4 oz, non-setting, multi-purpose compound, aluminum, t plus 2 thread sealant, may be pressurized immediately following application, copper, RTRP, Conforms To TT-S-1732, Polyethylene, Iron, Brass, PVC, Stainless Steel, Use On Threaded Galvanized Steel, CPVC and ABS Pipe, Contains Teflon and Synthetic Fibers To Create A Stronger Seal, Can.

These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Contains teflon, and synthetic fibers for a stronger seal. Non-hardening thread sealant containing PTFE plus synthetic fibers. It is excellent for service where immediate pressurization is necessary.

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant #ad - . Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads. For use on natural gas, fuels, refrigerants, oils, lp gas, water, etc. Made in United states.

More information about The Rectorseal Corporation GIDDS-441280 #ad


Similar products



Harvey 017065 Gas Line PTFE Thread Seal Tape

#ad
Harvey 17065 #ad - It is excellent for service where immediate pressurization is necessary. Harvey 017065 gas line ptfe thread Seal Tape Contains teflon, and synthetic fibers for a stronger seal. Non-hardening thread sealant containing PTFE plus synthetic fibers. For use on natural gas, fuels, water, oils, refrigerants, lp gas, etc.

Harvey 017065 Gas Line PTFE Thread Seal Tape #ad - Made in United states. It also breaks out easily without galling, seizing, or damaging threads. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Recommended leakproof sealant for lines carrying natural gas, propane, butane; and water, oil, and chemical installations.

Use on pipe, bolts, conduit, vales, anything with a thread. Permits easy disassembly. Extra heavy, full density PTFE tape especially for gas lines. Yellow gas line thread seal tape with PTFE. Its low coefficient of friction allows tighter joint makeup with lower torque.

More information about Harvey 17065 #ad


Similar products



Dormont 20-3132-18B Gas Dryer 1/2-Inch Diameter Connector, 18-Inch Length

#ad
Watts 20-3132-18B #ad - For use on natural gas, lp gas, fuels, oils, refrigerants, water, etc. Made in United states. This dormont gas connector is csa design certified domestically and internationally for indoor and outdoor use with natural, manufactured, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, and LP-gas air mixtures Durable, liquefied petroleum, mixed, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

Dormont 20-3132-18B Gas Dryer 1/2-Inch Diameter Connector, 18-Inch Length #ad - . It is excellent for service where immediate pressurization is necessary. Extra heavy, full density PTFE tape especially for gas lines. 1/2-inch od x 18-Inch length gas connector. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Contains teflon, and synthetic fibers for a stronger seal.

Its low coefficient of friction allows tighter joint makeup with lower torque. Non-hardening thread sealant containing PTFE plus synthetic fibers. Yellow gas line thread seal tape with PTFE. Made in the USA.

More information about Watts 20-3132-18B #ad


Similar products



Brasscraft CSSC44-48 Range and Gas Furnace Flex-Lines

#ad
BRASSCRAFT CSSC44-48 #ad - 1/2-inch od x 18-Inch length gas connector. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Mip x 48 in. From BrassCraft. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Mip x 1/2 in. Stainless Steel Construction. Stainless steel gas dryer connector.

Recommended leakproof sealant for lines carrying natural gas, propane, butane; and water, oil, and chemical installations. Use on pipe, bolts, vales, conduit, anything with a thread. Permits easy disassembly. Od 1/2 in. Made in the USA. Connect your gas range, furnace, or boiler with this Gas Range and Gas Furnace Flex-Line 5/8 in.

Brasscraft CSSC44-48 Range and Gas Furnace Flex-Lines #ad - For use on natural gas, oils, fuels, water, refrigerants, lp gas, etc. Made in United states. The connector supports appliances up to 106, 000 BTU. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used indoors or outdoors. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products.

More information about BRASSCRAFT CSSC44-48 #ad


Similar products



Deflecto Aluminum Duct with Connectors, Semi Ridgid, Flexible , 4" x 2', Silver AM42

#ad
Deflecto AM42 #ad - Non-hardening thread sealant containing PTFE plus synthetic fibers. Diameter fits compatible ducts. For use on natural gas, water, refrigerants, lp gas, fuels, oils, etc. Made in United states. Contains teflon, and synthetic fibers for a stronger seal. Flexible Aluminum Duct. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products.

Fire-resistant Aluminum. Stainless steel gas dryer connector. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Flexible Aluminum Duct. 4 inch dia X 2-feet Length. Ranges, furnaces and boilers Up To 106, 000 Btu. 1/2-inch od x 18-Inch length gas connector. Yellow gas line thread seal tape with PTFE.

Deflecto Aluminum Duct with Connectors, Semi Ridgid, Flexible , 4" x 2', Silver AM42 #ad - It also breaks out easily without galling, seizing, or damaging threads. Recommended leakproof sealant for lines carrying natural gas, butane; and water, propane, oil, and chemical installations. Use on pipe, bolts, conduit, vales, anything with a thread. Permits easy disassembly. 4 inch dia X 2-feet Length.

More information about Deflecto AM42 #ad


Similar products



Dormont 20-3132-36B 36 in. Long Outlet Diameter Male x 1/2 in. Female Gas Appliance Connector, 1 pack

#ad
Watts 20-3132-36B #ad - Contains teflon, and synthetic fibers for a stronger seal. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. 4 inch dia X 2-feet Length. Flexible Aluminum Duct. Flexible for easy installation. Fire-resistant Aluminum. Recommended leakproof sealant for lines carrying natural gas, butane; and water, propane, oil, and chemical installations.

Use on pipe, conduit, vales, bolts, anything with a thread. Permits easy disassembly. This dormont gas connector is csa design certified domestically and internationally for indoor and outdoor use with natural, liquefied petroleum, mixed, and lp-gas air mixtures durable, manufactured, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility quality flared end fittings create a metal to metal seal to ensure integrity in critical applications manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

Dormont 20-3132-36B 36 in. Long Outlet Diameter Male x 1/2 in. Female Gas Appliance Connector, 1 pack #ad - Its low coefficient of friction allows tighter joint makeup with lower torque. Fire-resistant Aluminum. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.

1/2-inch od x 36-Inch length gas connector. 100-percent Leak Tested.

More information about Watts 20-3132-36B #ad


Similar products



Builders Best 10151 Close Elbow

#ad
BUILDERS BEST 10151 #ad - 100-percent Leak Tested. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products. For 90 degree turns, especially on the dryer. Bulk Package. Stainless steel gas dryer connector. Made with 30 gauge aluminum for strength. Extra heavy, full density PTFE tape especially for gas lines.

Builders Best 10151 Close Elbow #ad - It also breaks out easily without galling, seizing, or damaging threads. 4 inch dia X 2-feet Length. Stainless Steel Construction. Stainless steel gas dryer connector. Its low coefficient of friction allows tighter joint makeup with lower torque. Recommended leakproof sealant for lines carrying natural gas, oil, butane; and water, propane, and chemical installations.

Use on pipe, bolts, conduit, vales, anything with a thread. Permits easy disassembly. Elbow turns 90 degrees within 4". Made in the USA. 1/2-inch od x 36-Inch length gas connector. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Flexible for easy installation.

More information about BUILDERS BEST 10151 #ad


Similar products



LASCO 17-5833 3/8-Inch Female Flare by 1/2-Inch Male Flare Brass Adapter

#ad
LASCO 17-5833 #ad - 3/8-inch female flare by 1/2-Inch male flare. Recommended leakproof sealant for lines carrying natural gas, propane, butane; and water, oil, and chemical installations. Use on pipe, vales, bolts, conduit, anything with a thread. Permits easy disassembly. Bulk Package. Ideal for connecting 2 ducts. For use on natural gas, oils, water, fuels, lp gas, refrigerants, etc.

Made in United states. 1/2-inch od x 18-Inch length gas connector. Made with 30 gauge aluminum for strength. Yellow gas line thread seal tape with PTFE. Stainless steel gas dryer connector. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings.

LASCO 17-5833 3/8-Inch Female Flare by 1/2-Inch Male Flare Brass Adapter #ad - 3/8" female flare x 1/2" Male Flare. Used for fuel, air, oil, liquid petroleum LP and natural gas lines connections.3/8-inch female flare by 1/2-Inch male flare. Height 3. 75 in.

More information about LASCO 17-5833 #ad


Similar products



SharkBite Depth & Deburr Deburring Depth Gauge Tool, Copper, CPVC, Pipe, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A, Orange

#ad
Cash Acme U702A #ad - Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Bulk Package. Height 3. 75 in. Length 095 in.

SharkBite Depth & Deburr Deburring Depth Gauge Tool, Copper, CPVC, Pipe, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A, Orange #ad - Female flare by male flare adapter. 3/8" female flare x 1/2" Male Flare. From copper and cpvc, 3/4 inch, 1/2 inch, 5/8 inch, to 1/4 inch, 3/8 inch, and 1 inch. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Non-hardening thread sealant containing PTFE plus synthetic fibers. Ranges, furnaces and boilers Up To 106, 000 Btu.

Brass material lasts long. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Performance: rated to 200 psi and 200 Degrees F. 4 in. Push.

More information about Cash Acme U702A #ad


Similar products



Dormont 20-3132-24B Gas Dryer 1/2-Inch Diameter Connector, 24-Inch Length

#ad
Watts 20-3132-24B #ad - Flexible Aluminum Duct. Made in the USA. Ideal for 90 degree Turns, Especially On Dryer. Corrosion resistant coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Used for fuel, air, oil, liquid petroleum LP and natural gas lines connections.

Dormont 20-3132-24B Gas Dryer 1/2-Inch Diameter Connector, 24-Inch Length #ad - 3/8-inch female flare by 1/2-Inch male flare. Performance: rated to 200 psi and 200 Degrees F. Made in the USA. Fire-resistant Aluminum. Use in potable water and hydronic heating applications. Just push to create a watertight seal. Non-hardening thread sealant containing PTFE plus synthetic fibers. Its low coefficient of friction allows tighter joint makeup with lower torque.

Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Ideal for connecting 2 ducts. Connector made with 1/2-inch MIP x 1/2-Inch FIP brass flare fittings. Contains teflon, and synthetic fibers for a stronger seal. 4 inch dia X 2-feet Length.

More information about Watts 20-3132-24B #ad


Similar products