American Valve AV301353 1-Inch Copper Split Ring Hanger

#ad
Accord AV301353 #ad - American Valve AV301353 1-Inch Copper Split Ring Hanger #ad - Suspends non-insulated, stationary pipe away from walls, joists, beams and rafters. For use with a 1-in pipe. For use with 3/8 inch threaded rod. Can be used vertically and horizontally. American valve copper split ring hangers are recommended for suspension of non-insulated stationary piping, allowing it to run close to the ceiling or walls.

Made of copper plated cast iron.

More information about Accord AV301353 #ad

American Valve AV301689 3/8-Inch Ceiling Flange

#ad
Accord AV301689 #ad - Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. Made of cast iron. The threads are 3/8 -16 unC. Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. American valve cast iron ceiling flanges can be mounted to most surfaces in conjunction with a 3/8-in threaded rod.

The flange is 16 threads per inch.

More information about Accord AV301689 #ad


Similar products



American Valve AV301348 3/4-Inch Copper Split Ring Hanger

#ad
Accord AV301348 #ad - Can be used vertically and horizontally. Made of copper plated cast iron. Made of cast iron. The flange is 16 threads per inch. Suspends non-insulated, joists, stationary pipe away from walls, beams and rafters. For use with a 3/4-in pipe. Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. For use with 3/8 inch threaded rod.

American Valve AV301348 3/4-Inch Copper Split Ring Hanger #ad - Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. The threads are 3/8 -16 unC. American valve copper split ring hangers are recommended for suspension of non-insulated stationary piping, allowing it to run close to the ceiling or walls.

More information about Accord AV301348 #ad


Similar products



Jones Stephens Corp - 3/8 Copper Plated Ceiling Flange

#ad
Jones Stephens #ad - Jones Stephens Corp - 3/8 Copper Plated Ceiling Flange #ad - Made of cast iron. Plumbing specialties conduit hanger Flanges Ceiling, Single Unit Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. For use with 3/8 inch threaded rod. Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. Suspends non-insulated, joists, stationary pipe away from walls, beams and rafters.

For use with a 3/4-in pipe. Can be used vertically and horizontally. Single unit, by jones stephens, partnumber H82375, 3/8" Ceiling Flange, Copper Finish, Plumbing Misc. Made of copper plated cast iron. Conduit Hanger. The threads are 3/8 -16 unC. The flange is 16 threads per inch.

More information about Jones Stephens #ad


Similar products



National Hardware N179-432 4000BC Steel Threaded Rod in Zinc plated

#ad
National Hardware N179-432 #ad - Suspends non-insulated, stationary pipe away from walls, joists, beams and rafters. For use with a 3/4-in pipe. Whether for home, builder or industrial customers, farm, National has all the right hardware in the sizes and finishes you need. Minimum tensile strength of 60 KSI. Can be drilled, cut, heated, shaped.

Meets astm a307 Grade A. Made of cast iron. Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. Can be used vertically and horizontally. Consists of UNC coarse threads. Zinc plating offers corrosion resistance for all of your functional hardware needs. For use with 3/8 inch threaded rod. Made of copper plated cast iron.

National Hardware N179-432 4000BC Steel Threaded Rod in Zinc plated #ad - The flange is 16 threads per inch. The threads are 3/8 -16 unC. Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Quality metal sheets and rod both threaded and smooth for all for your construction projects.

More information about National Hardware N179-432 #ad


Similar products



American Valve AV301343 1/2-Inch Copper Split Ring Hanger

#ad
Accord AV301343 #ad - Consists of UNC coarse threads. Made of copper plated cast iron. Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. Suspends non-insulated, joists, stationary pipe away from walls, beams and rafters. For use with a 1/2-in pipe. The threads are 3/8 -16 unC. Made of cast iron.

For use with 3/8 inch threaded rod. Authorized replacement for Stanley Hardware Stock #N179-432. Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. Can be used vertically and horizontally. The flange is 16 threads per inch. For use with 3/8 inch threaded rod. American valve copper split ring hangers are recommended for suspension of non-insulated stationary piping, allowing it to run close to the ceiling or walls.

American Valve AV301343 1/2-Inch Copper Split Ring Hanger #ad - Can be drilled, cut, heated, shaped. Meets astm a307 Grade A. Can be used vertically and horizontally. Suspends non-insulated, joists, stationary pipe away from walls, beams and rafters. For use with a 3/4-in pipe.

More information about Accord AV301343 #ad


Similar products



3/8" COPPER PLATED CEILING FLANGE 2 PACK - ICS Industries

#ad
Hailiang #ad - Can be used vertically and horizontally. Made of cast iron. Minimum tensile strength of 60 KSI. For use with 3/8 inch threaded rod. Can be drilled, cut, heated, shaped. Meets astm a307 Grade A. Finish: Copper Plating. The flanges can be mounted to most surfaces. The threads are 3/8 -16 unC. Authorized replacement for Stanley Hardware Stock #N179-432.

3/8" COPPER PLATED CEILING FLANGE 2 PACK - ICS Industries #ad - Suspends non-insulated, joists, stationary pipe away from walls, beams and rafters. For use with a 3/4-in pipe. Our ceiling flanges are used in conjunction with threaded rod. Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

Material: Malleable Iron. Can be used vertically and horizontally. Suspends non-insulated, stationary pipe away from walls, joists, beams and rafters. For use with a 1/2-in pipe. Ics industries - 3/8" copper plated ceiling flange 2 pack designed to attach a 3/8-in threaded rod to a ceiling or overhead beam.

More information about Hailiang #ad


Similar products



American Valve AV301968 1-1/2-Inch Galvanized Split Ring Hanger

#ad
Accord AV301968 #ad - Our ceiling flanges are used in conjunction with threaded rod. Authorized replacement for Stanley Hardware Stock #N179-432. The flanges can be mounted to most surfaces. American valve split ring hangers are recommended for suspension of non-insulated stationary piping, allowing it to run close to the ceiling or walls.

American Valve AV301968 1-1/2-Inch Galvanized Split Ring Hanger #ad - The threads are 3/8 -16 unC. Used to mount threaded rod. Suspends stationary non-insulated pipe. Made of cast iron. Made of galvanized cast iron. For use with 3/8 inch threaded rod. Finish: Copper Plating. For use with 3/8-in threaded rod. Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. Can be drilled, cut, heated, shaped.

Meets astm a307 Grade A. Made of copper plated cast iron. Can be used vertically and horizontally. Minimum tensile strength of 60 KSI. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

More information about Accord AV301968 #ad


Similar products



TOP Plate Connector Case of 1

#ad
Sioux Chief 541-GPK2 #ad - Made of copper plated cast iron. Made of copper plated cast iron. Can be used vertically and horizontally. Made of galvanized cast iron. Used to connect split ring hangers. Conduit Hanger. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

Material: Malleable Iron. For use with 3/8-in threaded rod. Sioux chief" top plate connector use with 3/8" all thread rod used to connect split ring hangers Allows for piping that run close to walls Malleable iron construction Designed to attach a 3/8-in threaded rod to a ceiling or overhead beam. Allows for piping that run close to walls.

TOP Plate Connector Case of 1 #ad - Malleable iron construction. Consists of UNC coarse threads. Made of cast iron. Minimum tensile strength of 60 KSI. Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. Can be drilled, cut, heated, shaped. Meets astm a307 Grade A. Used to mount threaded rod.

More information about Sioux Chief 541-GPK2 #ad


Similar products



Brass Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right Hand Threads

#ad
Small Parts #ad - Both have threads along part or all of their length. Made of copper plated cast iron. Can be used vertically and horizontally. The brass fully threaded rod/stud has a plain finish and threads along its entire length. Malleable iron construction. Made of cast iron. For use with 3/8 inch threaded rod. Can be drilled, cut, heated, shaped.

Brass Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right Hand Threads #ad - Meets astm a307 Grade A. Made of galvanized cast iron. Made of copper plated cast iron. Used to connect split ring hangers. Used to mount threaded rod. Suspends stationary non-insulated pipe. Suspends non-insulated, stationary pipe away from walls, joists, beams and rafters. For use with a 3/4-in pipe. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

Material: Malleable Iron. The flanges can be mounted to most surfaces. For use with 3/8-in threaded rod.

More information about Small Parts #ad


Similar products



Everflow Supplies CTEC0012 Copper Cap with Sweat Socket, 1/2

#ad
Everflow Supplies CTEC0012 #ad - This is an ever flow Supplies cap for closing off pipes. Minimum tensile strength of 60 KSI. Consists of UNC coarse threads. Soldering cups on both ends. Overflow part number CTEC0012. The threads are 3/8 -16 unC. Made of galvanized cast iron. The flange is 16 threads per inch. For use with 1/2 inch Nominal size Copper pipe.

Everflow Supplies CTEC0012 Copper Cap with Sweat Socket, 1/2 #ad - Can be drilled, heated, cut, shaped. Meets astm a307 Grade A. Malleable iron construction. Suspends non-insulated, stationary pipe away from walls, joists, beams and rafters. For use with a 1/2-in pipe. For use with 3/8 inch threaded rod. Can be used vertically and horizontally. Authorized replacement for Stanley Hardware Stock #N179-432.

Allows varying types of pipe hangers to be threaded on the other side of the threaded rod. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod. Material: Malleable Iron. Finish: Copper Plating. Conduit Hanger.

More information about Everflow Supplies CTEC0012 #ad


Similar products